Technical Accessories

Anodised valve caps

With valve opener function

Pre-cut stickers

Suitable for front and rear wheel rim

Including "DUKE" lettering

Contains all the components needed to convert the standard cast wheels to spoke wheels

Front wheel 3.0 x 19"

Rear wheel 5.0 x 17"

Repair kit for tube tyres

Contents:

2 x Tube patches size

1 x Tube patch size 7

1 x Tube of SVS vulvanizing fluid 3g

1 x Emery paper

1 x Car valve core, short

1 x Slotted valve cap

3 x Cartridge 16g each, with freeze protector label

1 x Cartridge adapter

1 x Manual

1 x Textile storage bag

Makes removal of the front wheel easier

For all front axles with a diameter of 22mm

Makes removal of the front wheel easier

For all front axles with a diameter of 22mm

Pre-cut stickers

Suitable for front and rear wheel rim

For wheel size 18/21"; 19/21"

Anodised valve caps

Optimal protection against penetration of mud, sand and water into the wheel bearing of your wheel

Reduces wear on sealing rings and wheel bearings for longer service life

Incl. special low friction shaft sealing rings

Optimal protection against penetration of mud, sand and water into the wheel bearing of your wheel

Reduces wear on sealing rings and wheel bearings for longer service life

Wheel bearing repair kit with wheel bearing protection cap set and low friction shaft sealing rings

Optimal protection against penetration of mud, sand and water into the wheel bearing of your wheel

Reduces wear on sealing rings and wheel bearings for longer service life

Wheel bearing repair kit with wheel bearing protection cap set and low friction shaft sealing rings

Optimal protection against penetration of mud, sand and water into the wheel bearing of your wheel

Reduces wear on sealing rings and wheel bearings for longer service life

Incl. special low friction shaft sealing rings

Contains all the components needed to convert the standard cast wheels to spoke wheels

Specially designed for the challenges of off-road use

For the off-road motorcycles look

The best compromise between stiffness and flexibility

Front wheel 3.0 x 19", rear wheel 5.0 x 17"

Tube-type design

Wave brake disc (front) and brake disc (rear) included

Pre-cut stickers

Suitable for front and rear wheel rim

Optimal protection against penetration of mud, sand and water into the wheel bearing of your wheel

Reduces wear on sealing rings and wheel bearings for longer service life

Incl. special low friction shaft sealing rings

Visual highlight

Race look

Orange standard wheels of the 890 Duke R

Visual highlight

Race look

Orange standard wheels of the 1290 Super Duke R

Developed for use on the toughest off-road terrain

Tested in the toughest conditions

For the off-road motorcycles look

The right combination of look, style, and performance

Elegant anodised surface

Visual highlight

Tube-type design for all popular off road tires with size 90/90-21 (1.85") / 140/80-18 (2,5")

Developed for use on the toughest off-road terrain

Tested in the toughest conditions

For the off-road motorcycles look

The right combination of look, style, and performance

Elegant anodised surface

Visual highlight

Tube-type design for all popular off road tyres with sizes 90/90-21 (1.85") and 150/70-18 (2.5")

Maximum weight saving compared to standard wheels

An absolute must for every ambitious biker

Developed together with the vehicle

Visual highlight

Race look

Forged aluminium wheels, which were developed specific for KTM models

Weight savings: Front wheel: approximately 700g Rear wheel: approximately 500g

Developed for use on the toughest off-road terrain

Tested in the toughest conditions

For the off-road motorcycles look

The right combination of look, style, and performance

Elegant anodised surface

Visual highlight

Tube-type design for all popular offroad tires with size 90/90-21 (1.85").

Developed for use on the toughest off-road terrain

Tested in the toughest conditions

Tube-type design for all popular offroad tires with size 90/90-21 (1.85")

Contains all the components needed to convert the standard cast wheels to spoke wheels

Front wheel 3.0x19", rear wheel 5.0x17"

Kit without tyre pressure sensors, just standard valves included

Developed for use on the toughest off-road terrain

Tested in the toughest conditions

For the off-road motorcycles look

The right combination of look, style, and performance

Elegant anodised surface

Visual highlight

Tube-type design for all popular offroad tires with size 90/90-21 (1.85") / 140/80-18 (2,5")

Anodised hub milled from a whole piece

Maximum weight saving compared to standard wheels

Maximum gain in handling and, at the same time, stability in challenging off-road situations

Anodised aluminium spoke nipples

Anodised hub milled from a whole piece

Maximum weight saving compared to standard wheels

Maximum gain in handling and, at the same time, stability in challenging off-road situations

Anodised aluminium spoke nipples

Developed for use on the toughest off-road terrain

Tested in the toughest conditions

Tube-type design for all popular offroad tires with sizes:

90/90-21 (1.85")

140/80-18 (2,5")

Anodised hub milled from a whole piece

Maximum gain in handling and, at the same time, stability in challenging off-road situations

Anodised aluminium spoke nipples

Reinforced spokes for higher impact resistance

Anodised hub milled from a whole piece

Maximum weight saving compared to standard wheels

Maximum gain in handling and, at the same time, stability in challenging off-road situations

Anodised aluminium spoke nipples

Anodised hub milled from a whole piece

Maximum gain in handling and, at the same time, stability in challenging off-road situations

Anodised aluminium spoke nipples

Reinforced spokes for higher impact resistance

Anodised hub milled from a whole piece

Maximum weight saving compared to standard wheels

Maximum gain in handling and, at the same time, stability in challenging off-road situations

Anodised aluminium spoke nipples

Anodised hub milled from a whole piece

Maximum gain in handling and, at the same time, stability in challenging off-road situations

Anodised aluminium spoke nipples

Reinforced spokes for higher impact resistance

Anodised hub milled from a whole piece

Maximum weight saving compared to standard wheels

Maximum gain in handling and, at the same time, stability in challenging off-road situations

Anodised aluminium spoke nipples