Technical Accessories

Protects the motorcycle from dust, scratches and the like

The indoor bike cover makes every KTM an eye-catcher in the garage

Completely dust and dirt-impermeable fabric

Material with special structure

The inside is softly padded

Tool for lifting the motorcycle at the rear axle

Secure stand for your bike

Practical help when loading the bike or jacking up with the rear wheel lifting device

The optimum solution for always having the most important tools to hand when on the road

Use this to remove the dirt from your last mud battle with ease!

A motorcycle grip rubber (not included) can be fitted to the grip

 

Anodised valve caps

With valve opener function

Anodised valve caps

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Contents are in accordance with DIN standard 13167-2014 for motorcyclists

Note: It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain

Guaranteed perfect protection in all seasons

Made of exclusive, pigmented fabric

Includes practical carrying bag

Protects the motorcycle from dust, scratches and the like

There's racing experience here as well!

Practical tyre lever set, consisting of 3 x short version 51012092100 and 3 x long version 51012093100

Support adapters are clamped into the rear wheel lifting device

Tool for lifting the motorcycle at the rear axle

Easy to use!

Measuring range 0 bar – 4 bar

Clamping head rotatable through 90° on a flexible stainless steel feed line

The valve shaft is therefore accessed easily and quickly

Very accurate measurements by way of a durable internal membrane

Internal pressure is reduced after use by a relief valve (push button)

Comfortable unhooking of springs

Convenient and easy to use

Easy handling and operation

Repair kit for tube tyres

Contents:

2 x Tube patches size

1 x Tube patch size 7

1 x Tube of SVS vulvanizing fluid 3g

1 x Emery paper

1 x Car valve core, short

1 x Slotted valve cap

3 x Cartridge 16g each, with freeze protector label

1 x Cartridge adapter

1 x Manual

1 x Textile storage bag

Testing, charging and keeping batteries fresh

Fully automatic and economical battery charging by means of programmed charge characteristic

Short-circuit protection

Reverse polarity protection

Can be used for several types of batteries (Pb, LiFePo4)

Charging with constant power, or with a specific power control program

Trickle charge during diagnostic or flashing the vehicle

Recovery mode for low battery voltage (BMS, battery management system)

Optimizes battery performance and service life

Precise battery monitoring

Including power supply cable type UK

 

Enables secure fastening of the machine

Protects handlebar and tank from scratches

Made from durable ballistic nylon

Load capacity of 280kg

With handlebar loops

With rubberised hooks and carabiner on belt ends

With scaling for both the fluid level and different mixture ratios

Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister

Simple handling thanks to the ergonomic design

 

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Guaranteed perfect protection in all seasons

Made of exclusive, pigmented fabric

Includes practical carrying bag

Protects the motorcycle from dust, scratches and the like

Pre-cut stickers

Suitable for front and rear wheel rim

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Includes drilling for safety wire

On the engine there are two oil drain plugs mounted

 

13cm tall, 3 pieces each

For tank and carburetor bleeding

Gasoline resistant

Can only be used for bleeding purposes

Cannot be used as a connection between tank and carburetor!

Highest quality workmanship

Including straps

It withstands a load of 180 kg

The total length is approximately 200cm, folded approximately 100cm

 

Prevents dirty grips

100mm length

20 blades: 0.05 - 0.1 - 0.15 - 0.2 - 0.25 - 0.3- 0.35 - 0.4 - 0.45 - 0.5 - 0.55 - 0.6 - 0.65 - 0.7 - 0.75 - 0.8 - 0.85 - 0.9 - 0.95 - 1.0mm

Magnetic

Never lose a bolt again!

Perfect for use in combination with the SX stand

 

Enables secure fastening of the machine

Protects handlebar and tank from scratches

Made from durable ballistic nylon

Load capacity of 280 kg

With handlebar loops

Perfect for extending lashing straps with hooks or carabiners

 Enables secure fastening of the machine

Protects handlebar and tank from scratches

Made from durable ballistic nylon

Load capacity of 280kg

With handlebar loops

With rubberized hooks on belt ends

Comfortable and easy to use

Fits all standard valves

Pressure display in bar or psi

Integrated pressure release valve for accurate pressure adjustment

Disengageable display and work area lighting

Energy-saving function with automatic cut-off

Maximum measuring pressure: 11 bar

Small and light, so very portable - saves the day in the event of a puncture on the move!

Mini-foot pump with pressure gauge on the swivelling valve head that fits all prevalent valves

Integrated double-cylinder with pressure switch-over to high pressure

Maximum 12 bar

Height: approximately 170mm folded together

Tool for lifting the motorcycle at the rear axle

Secure stand for your bike

Optimum tyre temperature is achieved after only 30 minutes or so and then stabilized by a high-precision thermostat (+/-1°C)

LED for monitoring the set temperature and the current status (heating up/maintaining temperature level)

The electronic controller enables selection of three temperature ranges:

50°C for rain tyres, 80°C and 100°C subject to tyre manufacturer specifications

The carbon-fibre heating element is arranged transversely in a double circuit and ensures optimum heating of the tyre flank. The carbon fibre is coated in a heat-conducting silicone layer for maximum strength and protection from damage. A special non-stick material with interwoven copper strands ensures optimized heat conduction from the tyre warmer to the tread

Elasticated side covers ensure an excellent fit

With the cover pulled far over the tyre flank, the rim also heats up very quickly

Insulating layer to prevent heat loss to the exterior

Made from water-repellent, oil and fuel-proof, fire and rip-resistant material

CE-certified

230 VAC, 50 - 60 Hz, Euro plug

Fits tyre sizes from min. 180/55 - 17 up to max. 200/60 - 17

 

FITS: 790 Duke black 2019, 790 Duke orange 2019, 1290 Super Duke R white 2019, 1290 Super Duke R black 2019, 1290 Super Duke GT black 2019, 1290 Super Duke GT white 2019, 790 Duke orange 2020, 790 Duke black 2020, 1290 Super Duke R black 2020, 1290 Super Duke R orange 2020, 1290 Super Duke GT black 2020, 1290 Super Duke GT white 2020, 890 Duke R 2020, 890 DUKE orange 2021, 890 DUKE black 2021, 890 DUKE R 2021, 1290 SUPER DUKE R black 2021, 1290 SUPER DUKE R orange 2021, 1290 SUPER DUKE GT black 2021, 1290 SUPER DUKE GT white 2021, 890 DUKE orange 2022, 890 DUKE black 2022, 890 DUKE R 2022, 1290 SUPER DUKE R black 2022, 1290 SUPER DUKE R orange 2022, 1290 SUPER DUKE GT orange 2022, 1290 SUPER DUKE R EVO orange 2022, 1290 SUPER DUKE R EVO black 2022, 790 DUKE grey 2022, 790 DUKE orange 2022, RC 8C 2022, 890 DUKE R 2023, 1290 SUPER DUKE R orange 2023, 1290 SUPER DUKE R black 2023, 1290 SUPER DUKE R EVO orange 2023, 1290 SUPER DUKE R EVO black 2023, 1290 SUPER DUKE GT orange 2023, RC 8C 2023, 790 DUKE orange 2023, 790 DUKE grey 2023, 890 DUKE GP orange 2022, 890 DUKE GP black 2023

Pre-cut stickers

Suitable for front and rear wheel rim