Technical Accessories

Prevents dirty grips

Testing, charging and keeping batteries fresh

Fully automatic and economical battery charging by means of programmed charge characteristic

Short-circuit protection

Reverse polarity protection

Can be used for several types of batteries (Pb, LiFePo4)

Charging with constant power, or with a specific power control program

Trickle charge during diagnostic or flashing the vehicle

Recovery mode for low battery voltage (BMS, battery management system)

Optimizes battery performance and service life

Precise battery monitoring

Including power supply cable type UK

 

Gain in stability at the front wheel

Fully adjustable

Top performance/price ratio

Well thought-out mounting of the damper enables individual handlebar adjustment

00050000929 handle bar support kit required for use on MY16 and on XC from MY16

For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required

 

Uncompromising race look

Extremely light

Open design

2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

Mounting not possible with Twinwall handlebars

Attached with a special bracket on the handlebar

 

Uncompromising race look

Extremely light

Open design

2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

Attached with a special bracket on the handlebar

 

Maximum protection against falls, flying stones, branches, etc

Indispensable companion for heavy off-road and Supermoto use

Wide, generous design in combination with sturdy aluminium bracket

Prevents broken levers

Made of robust plastic

Excellent weather protection

Maximum protection against falls, flying stones, branches, etc

Indispensable companion for heavy off-road and Supermoto use

Wide, generous design in combination with sturdy aluminium bracket

Prevents broken levers

Made of robust plastic

Maximum protection against falls, flying stones, branches, etc

Indispensable companion for heavy off-road and Supermoto use

Wide, generous design in combination with sturdy aluminium bracket

Prevents broken levers

Made of robust plastic

Excellent weather protection

Maximum protection against falls, flying stones, branches, etc

Indispensable companion for heavy off-road and Supermoto use

Wide, generous design in combination with sturdy aluminium bracket

Prevents broken levers

Made of robust plastic

Available in five different heights

Included in the kit are 2x handlebar support lower parts and 2x fastening bolts

The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support

 

Exceptionally robust

LED technology, specially developed for use with the Enduro

Very high light output

Light intensity 1500 lm

Light colour approx. 5,500 K

Can be installed in the standard headlight mask

Plug & Play mounting

On EXC and Freeride models, the LED light is switched on and off using the fade-in switch

This article is not available in Germany.

 

Made of robust material

Pre-cut stickers

Contains: 5 sheets

 

Enables secure fastening of the machine

Protects handlebar and tank from scratches

Made from durable ballistic nylon

Load capacity of 280kg

With handlebar loops

With rubberised hooks and carabiner on belt ends

Recommended for storing your timecard during races

Stick it directly to the seat with grip glue

 

Robust, solid construction

Modern and simple design

Easy to mount

New bike stand generation

Plastic - aluminium combined for highest stiffness

Extremely stable due to a broad stand design

Top plate in 2k injection moulding technology

Side plates for graphics mounting

Use either the supplied, or your own graphics

 

Specially developed for use in motocross

No O- or Z-rings > minimum loss of power and good durability

Visual highlight

Already mandatory in many competitions

Provides optimum protection

Visual highlight

With the integrated card holder you always have the time in view

A small extra pocket allows you to stow small items

Can also be fitted in combination with the PHDS-handlebar support

 

Made of high-strength aluminium

Improved braking performance

Required for using a 270 mm brake disc and 2-piston Brembo brake caliper

 

No fading

Outer ring made of stainless high-performance brake steel

Minimal wear on brake pads

Significantly longer lasting

With Flame design for added braking performance

Extra thick: 4.6mm

 

Makes it easier to stand your motorcycle up

Specially developed for extreme conditions

Strap made from high-strength nylon

Tool for lifting the motorcycle

Secure stand for your bike

Stroke: 315/425mm

Maximum load: 150kg

 

Pre-cut stickers

Suitable for front and rear wheel rim

For wheel size 18/21"; 19/21"

 

Visual highlight

Race look

Magnetic

Never lose a bolt again!

Perfect for use in combination with the SX stand

 

Perfect for all 2-stroke riders on the move

The small bottle fits in your tool bag or jacket

Capacity 250 ml, with scaling for different mixture ratios (1:40 / 2.5%; 1:50 / 2%; 1:60 / 1.7%; 1:80 / 1.25%)

 

Move along with weight shift

Permanent contact between boot and footpeg

Extends the service life of your boots

Enlarged tread area

More control

More curve pressure

Easier and faster weight shifting

Easier shifting and braking

Spring-mounted, 20-degree rotational movement possible towards front and rear

 

Closed design

2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

Available in two different heights

Improved optics

Low version

 

Closed design

2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

Available in two different heights

Improved optics

Low version

 

Closed design

2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

Available in two different heights

Improved optics

Low version

 

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Including plastic insert

Reduces the risk of a lever being broken

Suitable for all Brembo® and Formula brake and clutch assembles

These CNC-machined, high-strength aluminium handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp

Twisting and bending are therefore practically impossible

Use of these handlebar risers is only possible on CNC-machined triple clamps

Available in three different heights

 

FITS: SX-E 5 2020, 50 SX 2020, 50 SX Mini 2020, 65 SX 2020, 85 SX 17/14 2020, 85 SX 19/16 2020, Freeride E-XC 2020, 150 EXC TPI 2020, 250 EXC Six Days TPI 2020, 250 EXC TPI 2020, 300 EXC Six Days TPI 2020, 300 EXC TPI 2020, 250 EXC-F Six Days 2020, Freeride 250 F 2020, 250 EXC-F 2020, 350 EXC-F Six Days 2020, 350 EXC-F 2020, 450 EXC-F Six Days 2020, 450 EXC-F 2020, 500 EXC-F Six Days 2020, 500 EXC-F 2020, 300 EXC TPI ERZBERGRODEO 2020, SX-E 5 2021, 50 SX 2021, 50 SX MINI 2021, 65 SX 2021, 85 SX 17/14 2021, 85 SX 19/16 2021, 150 EXC TPI 2021, 250 EXC SIX DAYS TPI 2021, 250 EXC TPI 2021, 250 EXC-F SIX DAYS 2021, 250 EXC-F 2021, 350 EXC-F SIX DAYS 2021, 350 EXC-F 2021, 450 EXC-F SIX DAYS 2021, 450 EXC-F 2021, 300 EXC SIX DAYS TPI 2021, 300 EXC TPI 2021, 500 EXC-F SIX DAYS 2021, 500 EXC-F 2021, FREERIDE E-XC 2021, 50 SX FACTORY EDITION 2021, 300 EXC TPI ERZBERGRODEO 2021, 350 EXC-F WESS 2021, SX-E 5 2022, 50 SX 2022, 50 SX MINI 2022, 65 SX 2022, 85 SX 17/14 2022, 85 SX 19/16 2022, FREERIDE E-XC 2022, 150 EXC TPI 2022, 250 EXC SIX DAYS TPI 2022, 250 EXC TPI 2022, 300 EXC SIX DAYS TPI 2022, 300 EXC TPI ERZBERGRODEO 2022, 300 EXC TPI 2022, 250 EXC-F SIX DAYS 2022, 250 EXC-F 2022, 350 EXC-F SIX DAYS 2022, 350 EXC-F FACTORY EDITION 2022, 350 EXC-F 2022, 450 EXC-F SIX DAYS 2022, 450 EXC-F 2022, 500 EXC-F SIX DAYS 2022, 500 EXC-F 2022, 50 SX 2023, 50 SX MINI 2023, 65 SX 2023, 85 SX 17/14 2023, 85 SX 19/16 2023, SX-E 5 2023, 150 EXC 2023, 250 EXC 2023, 250 EXC-F SIX DAYS 2023, 250 EXC-F 2023, 250 EXC SIX DAYS 2023, 350 EXC-F 2023, 350 EXC-F SIX DAYS 2023, 300 EXC 2023, 450 EXC-F SIX DAYS 2023, 450 EXC-F 2023, 300 EXC SIX DAYS 2023, 300 EXC ERZBERGRODEO 2023, 500 EXC-F 2023, 500 EXC-F SIX DAYS 2023, FREERIDE E-XC 2023, 85 SX 17/14 2024, SX-E 5 2024, 85 SX 19/16 2024, 450 SMR 2021, 450 SMR 2022

Enables secure fastening of the machine

Protects handlebar and tank from scratches

Made from durable ballistic nylon

Load capacity of 280 kg

With handlebar loops

Perfect for extending lashing straps with hooks or carabiners

 Enables secure fastening of the machine

Protects handlebar and tank from scratches

Made from durable ballistic nylon

Load capacity of 280kg

With handlebar loops

With rubberized hooks on belt ends

Comfortable and easy to use

Fits all standard valves

Pressure display in bar or psi

Integrated pressure release valve for accurate pressure adjustment

Disengageable display and work area lighting

Energy-saving function with automatic cut-off

Maximum measuring pressure: 11 bar

Small and light, so very portable - saves the day in the event of a puncture on the move!

Mini-foot pump with pressure gauge on the swivelling valve head that fits all prevalent valves

Integrated double-cylinder with pressure switch-over to high pressure

Maximum 12 bar

Height: approximately 170mm folded together