Technical Accessories

Teeth made of high-strength steel, for an extra long service life

Aluminium centre section, reduces unsprung masses

Permanently joined together with high-strength rivets

At least three times longer service life than other aluminium rear sprockets

50% lighter than steel rear sprockets

Longer service life of the entire drivetrain kit

Sprockets with different teeth number as stock are CCCUO_EU!

 

Secure stand for your bike

Made of high-strength aluminium

Predefined predetermined breaking point

Already mandatory in many competitions

Provides optimum protection

Visual highlight

Can also be fitted in combination with the PHDS-handlebar support

 

Keeps water out of the silencer during cleaning

For inner-diameter of 22 - 42mm

 

Made of high-strength aluminium

Tested in complex and specially-developed test cycles

Position markings for easy adjustment

Dimensions: A = 115 mm, B = 806 mm, C = 62 mm

 

There's racing experience here as well!

Practical tyre lever set, consisting of 3 x short version 51012092100 and 3 x long version 51012093100

Coated neoprene ring

Simply pulled over the grips

Optimum protection against blisters on the thumbs with these coated neoprene rings

 

Use this to remove the dirt from your last mud battle with ease!

A motorcycle grip rubber (not included) can be fitted to the grip

 

For all 48 mm forks

Ideal protection for sealing the fork

For use with an open fork protector

Comfortable unhooking of springs

Convenient and easy to use

Easy handling and operation

13cm tall, 3 pieces each

For tank and carburetor bleeding

Gasoline resistant

Can only be used for bleeding purposes

Cannot be used as a connection between tank and carburetor!

Made of high-quality carbon

High stiffness and strength

Specially reinforced at points at risk of grinding

Perfect fit

Highest quality workmanship

Including straps

It withstands a load of 180 kg

The total length is approximately 200cm, folded approximately 100cm

 

Pack of 100

20cm length

Factory adjuster wheel set - SXS08300040 : Genuine KTM Technical Accessories |

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Easy to mount
• Visual highlight
• Suitable for the left and right side

Easy readable display for easy monitoring of operating hours up to 99,999 total hours

The current rpm from 0-19,999 can also be displayed

With the supplied double-sided adhesive tape, easy installation is guaranteed, screwing is also possible

 

For all 48 mm forks

Ideal protection for sealing the fork

For use with an open fork protector

Exceptionally robust

Extremely light

Perfect fit

Perfectly integrated into the motorcycle

Highest quality workmanship

Easy to clean and scratch resistant

Integrated anti-theft device

Rear rack not included in scope of supply

 

Greater flexibility and better running characteristics

Constant and permanent lubrication

Better sealing against water and dirt

Significantly longer durability

4 pieces 37mm x 31mm

4 pieces 48mm x 40mm

 

Enables secure fastening of the machine

Protects handlebar and tank from scratches

Made from durable ballistic nylon

Load capacity of 280 kg

With handlebar loops

Perfect for extending lashing straps with hooks or carabiners

With return valve

Anodised dust protection cap

Quick and easy bleeding of the brake

Fits front and rear for KTM 690 Enduro R

Materials and knowledge derived from Akrapovič’s involvement in the racing world

Improved throttle response and increases in both power and torque

Designed to get the best performance from the motorcycle

Highest attention to detail for every aspect of the exhaust

Sporty sound

Finished with a nano coating, which offers easier cleaning and better scratch resistance

Plug & Play mounting

No new engine flashing necessary

FITS: 690 Enduro R 2019, 690 SMC R 2019, 690 Enduro R 2020, 690 SMC R 2020

No new engine flashing necessary

Sporty sound

Optimum combination of weight saving, durability and top performance/price ratio

Highest quality workmanship

Laser-engraved logo

Plug & Play mounting

No new engine flashing necessary

Sporty sound

Optimum combination of weight saving, durability and top performance/price ratio

Highest quality workmanship

Laser-engraved logo

Plug & Play mounting

FITS: 690 Enduro R 2019, 690 Enduro R 2020, 690 SMC R 2020, 690 ENDURO R 2021, 690 SMC R 2021, 690 ENDURO R 2022, 690 SMC R 2022, 690 ENDURO R 2023, 690 SMC R 2023

Tool for lifting the motorcycle at the rear axle

Secure stand for your bike

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Integrate perfectly into the vehicle design

Ball joint, for flexible adjustment of the rear mirror

Including adapter for mounting

Suitable for the left and right side

Exceptionally robust

Already mandatory in many competitions

CNC milled from high-strength aluminium

Elegant anodised surface

Developed for use on the race track

Race look

Disassembly/assembly in seconds

Protection of the lever in case of unintentional ground contact

No unintentional operation of the lever if contact is made with another rider/vehicle

Easy exchange for the standard handlebar weight

The benefits of the KTM tyre warmer

Optimum tyre temperature achieved in just 30 min

LED for monitoring tyre warming

Turns off automatically when the temperature reaches 78 °C to 80 °C

Special fire-proof internal insulation in pure aramid fibere for maximum energy efficiency

External cable and plug made of special rubber, resistant to grease and oil (max temp. 200 °C)

Manufactured from robust nylon, with silicone surface finish for protection against acid and dirt

Completely waterproof (inside and out), so safe and reliable in the rain as well

CE-certified230 V , 50 - 60 Hz, Euro plug

Fits tire sizes up to max. 160/60 - 17

 

FITS: 690 Duke orange 2019, 690 Enduro R 2019, 690 SMC R 2019, 125 Duke orange 2019, 125 Duke white 2019, 390 Duke orange 2019, 390 Duke white 2019, 390 Duke white 2019, RC 125 orange 2019, RC 390 black 2019, 690 SMC R 2020, 125 Duke orange 2020, 125 Duke white 2020, 390 Duke orange 2020, 390 Duke white 2020, RC 125 grey 2020, RC 390 white 2020, 690 SMC R 2021, 390 DUKE silver 2021, 390 DUKE white 2021, 690 ENDURO R 2022, 690 SMC R 2022, 125 DUKE black 2022, 125 DUKE silver 2022, 390 DUKE silver 2022, 390 DUKE white 2022, RC 125 black 2022, RC 125 white 2022, RC 390 blue 2022, RC 390 orange 2022, 690 ENDURO R 2023, 690 SMC R 2023, RC 125 GP orange 2023, RC 125 white 2023, RC 390 GP orange 2023, RC 390 blue 2023, 125 DUKE black 2023, 390 DUKE grey 2023, 390 DUKE black 2023, 125 DUKE black 2021, 125 DUKE silver 2021

13cm tall, 3 pieces each

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight