Technical Accessories

Perfect fit

Made of high-quality carbon

Optimal protection against stone impact

Only for Brembo systems

For tank and carburetor bleeding

Gasoline resistant

Can only be used for bleeding purposes

Cannot be used as a connection between tank and carburetor!

Uncompromising race look

Extremely light

Open design

2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

For removing the screw caps

Fits all closed cartridge forks

For all 48mm forks

Made of high-quality carbon

Makes removal of the front wheel easier

For all front axles with a diameter of 22mm

 

Original fairing parts, without the standard decor

Optimal basis for creating a unique design

Perfect fit

Personalise the look of your motorcycle

Kit contains:

Fender

Air filter cover

Air filter panel

Side fairing

Start number plate

Spoiler set

Headlight shroud

Tail section

Fork protector

 

FITS: 125 SX 2020, 250 SX 2020, 250 SX-F 2020, 350 SX-F 2020, 450 SX-F 2020, 150 EXC TPI 2020, 250 EXC Six Days TPI 2020, 250 EXC TPI 2020, 300 EXC Six Days TPI 2020, 300 EXC TPI 2020, 250 EXC-F Six Days 2020, 250 EXC-F 2020, 350 EXC-F Six Days 2020, 350 EXC-F 2020, 450 EXC-F Six Days 2020, 450 EXC-F 2020, 500 EXC-F Six Days 2020, 500 EXC-F 2020, 450 SX-F HERLINGS REPLICA 2019, 300 EXC TPI ERZBERGRODEO 2020, 125 SX 2021, 250 SX 2021, 150 EXC TPI 2021, 250 EXC SIX DAYS TPI 2021, 250 EXC TPI 2021, 250 SX-F 2021, 250 EXC-F SIX DAYS 2021, 250 EXC-F 2021, 350 SX-F 2021, 350 EXC-F SIX DAYS 2021, 350 EXC-F 2021, 450 SX-F 2021, 450 EXC-F SIX DAYS 2021, 450 EXC-F 2021, 300 EXC SIX DAYS TPI 2021, 300 EXC TPI 2021, 500 EXC-F SIX DAYS 2021, 500 EXC-F 2021, 250 SX-F PRADO 2020, 450 SX-F CAIROLI 2020, 300 EXC TPI ERZBERGRODEO 2021, 250 SX-F TROY LEE DESIGNS 2021, 350 EXC-F WESS 2021, 125 SX 2022, 250 SX 2022, 250 SX-F 2022, 350 SX-F 2022, 450 SX-F 2022, 150 EXC TPI 2022, 250 EXC SIX DAYS TPI 2022, 250 EXC TPI 2022, 300 EXC SIX DAYS TPI 2022, 300 EXC TPI ERZBERGRODEO 2022, 300 EXC TPI 2022, 250 EXC-F SIX DAYS 2022, 250 EXC-F 2022, 350 EXC-F SIX DAYS 2022, 350 EXC-F FACTORY EDITION 2022, 350 EXC-F 2022, 450 EXC-F SIX DAYS 2022, 450 EXC-F 2022, 500 EXC-F SIX DAYS 2022, 500 EXC-F 2022, 150 EXC 2023, 250 EXC 2023, 250 EXC-F SIX DAYS 2023, 250 EXC-F 2023, 250 EXC SIX DAYS 2023, 350 EXC-F 2023, 350 EXC-F SIX DAYS 2023, 300 EXC 2023, 450 EXC-F SIX DAYS 2023, 450 EXC-F 2023, 300 EXC SIX DAYS 2023, 300 EXC ERZBERGRODEO 2023, 500 EXC-F 2023, 500 EXC-F SIX DAYS 2023

Anodised hub milled from a whole piece

Maximum weight saving compared to standard wheels

Maximum gain in handling and, at the same time, stability in challenging off-road situations

Anodised aluminium spoke nipples

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Coated neoprene ring

Simply pulled over the grips

Optimum protection against blisters on the thumbs with these coated neoprene rings

 

The Twinwall, in the KTM orange design

Two handlebars in one

The exterior ensures maximum resistance to external damage (e.g. fall)

Additionally hard anodised against corrosion

The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls

Nylon inserts in the inner tube allow thinner walls

Very good flex properties

Comes with handlebar pad

Renthal Twinwall 999

Dimensions: A = 104 mm, B = 811 mm, C = 74 mm

 

Highest quality workmanship

Including straps

It withstands a load of 180 kg

The total length is approximately 200cm, folded approximately 100cm

 

Pack of 100

20cm length

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Secure stand for your bike

Aluminium construction with non-slip underlay so the motorcycle does not slip during washing

 

Clear pressure point across the entire temperature range

More brake power

Higher stiffness with the same weight

Made of high-strength aluminium

Clear pressure point across the entire temperature range

More brake power

Higher stiffness with the same weight

Made of high-strength aluminium

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Prevents dirty grips

Fast preload adjustment

Use of the entire length of the thread on the shock absorber

Very easy operation

Extremely low weight

Dirt-resistance

Mechanical drive

Testing, charging and keeping batteries fresh

Fully automatic and economical battery charging by means of programmed charge characteristic

Short-circuit protection

Reverse polarity protection

Can be used for several types of batteries (Pb, LiFePo4)

Charging with constant power, or with a specific power control program

Trickle charge during diagnostic or flashing the vehicle

Recovery mode for low battery voltage (BMS, battery management system)

Optimizes battery performance and service life

Precise battery monitoring

Including power supply cable type UK

 

This clever tool is a must for every motorcycle toolbox

With it, you can remove dirt from your fork seals effortlessly

No matter whether it's in the garage or directly at the racetrack this tool extends the life of your seals many times over

For all 48mm forks

 

Perfect for all on the move

Exceptionally robust

Note

Can be used with XACT/ XPLOR forks and shocks

Dimensions L=44,09 inch / W=16,14 inch / H=6,30 inch

 

Easy readable display for easy monitoring of operating hours up to 99,999 total hours

The current rpm from 0-19,999 can also be displayed

With the supplied double-sided adhesive tape, easy installation is guaranteed, screwing is also possible

 

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Provides more traction when starting

Made of high-strength aluminium

Elegant anodised surface

Pure race feeling

Mounted directly on the OEM-fork

Protects the brake disc in the event of a fall

High stiffness and strength

Protects the rear brake disc from stones and other solid obstacles

CNC milled from high-strength aluminium

Lighter than series components

Improved braking performance

Anodised hub milled from a whole piece

Maximum gain in handling and, at the same time, stability in challenging off-road situations

Anodised aluminium spoke nipples

Reinforced spokes for higher impact resistance

 

Anodised hub milled from a whole piece

Maximum weight saving compared to standard wheels

Maximum gain in handling and, at the same time, stability in challenging off-road situations

Anodised aluminium spoke nipples

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Optimal protection against stone impact

Made of robust plastic

Protects against the cover being pressed in by the brake lever in the event of a fall

For the original outer clutch cover

CNC milled from high-strength aluminium

Resistant to the toughest stresses and strains

Weight-optimised

Prevents dust and dirt from entering the tank when the fuel tank cap is opened

Filter is attached directly to the tank opening

Smoother power delivery with increased torque at lower rpm

 

High stiffness and strength

Extremely light

Extremely durable

Low thermal expansion

High long-term temperature stability

Visual highlight

Protects against heat and unwanted contact