Technical Accessories

Stabilises the motorcycle during transport

Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tightened too much

Is clamped between the bottom of the front fender and tyre

Significantly longer lasting

Very high friction coefficient for maximum and permanent braking force

Very good braking effect even in wet conditions

For extreme operating conditions (sand, gravel...)

Eliminates “fading” almost completely

200 m Wire with 0.61 mm diameter

Provides optimum protection

For rear sprockets up to 50T and 220mm - 260mm brake discs

Protects the brake disc in the event of a fall

High stiffness and strength

Protects the rear brake disc from stones and other solid obstacles

CNC milled from high-strength aluminium

Lighter than series components

Developed according to the requirements of our factory drivers

Less stress when riding

Objective: comfort AND safety

Ergonomic contour adapted to the shape of the hand for maximum comfort

Half waffle grip

For a secure grip

Three areas for the metal wire locking

Version: medium

Developed according to the requirements of our factory drivers

Less stress when riding

Objective: comfort AND safety

Ergonomic contour adapted to the shape of the hand for maximum comfort

Half waffle grip

For a secure grip

Three areas for the metal wire locking

Version: soft

For all 48mm forks

Extra strong film

For all 48 mm forks

Extra strong film

There's racing experience here as well! Practical tire iron - long version for minimum effort

There's racing experience here as well!

Practical tyre iron - short version ideal for the portable tool bag

Specially developed for use in motocross

No O- or Z-rings > minimum loss of power and good durability

13cm tall, 3 pieces each

Upgrade your bike with this factory handlebar and make use of the advantages of an adjustable crossbar, depending on the track ground:

When locked, the crossbar is solid (stiff)

When unlocked, the crossbar is flexible

Dimensions: A = 112mm, B = 811mm, C = 88mm

Uncompromising race look

CNC milled from high-strength aluminium

Resistant to the toughest stresses and strains

Minimal wear on brake pads

Significantly longer lasting

Full version for muddy track conditions