Technical Accessories

Excellent weather protection

Closed design

2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

Available in two different heights

Improved optics

High version

Universally applicable for mounting the GPS bracket

Made from high-tensile, durable steel

Highest quality workmanship

Double locking mechanism

Locking cylinder with optimum protection against any attempts at manipulation

Two keys supplied as standard

Includes rotating PVC cover that protects the cylinder lock from dirt

Protects the lower PDS bearing against dirt permeation

Extends the service life of the lower PDS bearing

Funnel specially developed for KTM motorcycles

Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation

Softer due to high content of organic substances

Thermal insulation by means of ceramic underlayer

Less aggressive brake feel

Lower friction coefficient than sintered brake pads

Special material mixture

Reduces dirt deposits between engine and skid plate

Provides better cooling of the engine

STEERING DAMPER BRACKET

High-end steering damper

Maximum control on fast tracks

Gain in stability at the front wheel

Fully adjustable

Well thought-out mounting of the damper enables individual handlebar adjustment

Reduced weight

Sensitive response behaviour

High speed DCC

Developed according to the requirements of our factory drivers

Optimum 25 click setting range

Proven success with the KTM Works Rally Team

For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required

The ideal tool for checking perfect wheel position when tensioning the chain

Significantly longer durability

Teeth made of high-strength steel, for an extra long service life

Extremely low-wear

Recommended for long journeys

Sprockets with different teeth number as stock are CCCUO_EU!

Provides more air

Maximum performance

Digital control

Current temperature can be read at any time

Variable switch-on temperature between 65°C and 95°C

Switch-off temperature 1°C below the selected switch-on temperature

Provides better cooling of the engine

Protects the radiator from mud, dirt and sand

Protection against rapid overheating of the engine in muddy conditions

For extremely muddy conditions

Stabilises the motorcycle during transport

Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tightened too much

Is clamped between the bottom of the front fender and tyre

Significantly longer lasting

Very high friction coefficient for maximum and permanent braking force

Very good braking effect even in wet conditions

For extreme operating conditions (sand, gravel...)

Eliminates “fading” almost completely

200 m Wire with 0.61 mm diameter

Provides optimum protection

For rear sprockets up to 50T and 220mm - 260mm brake discs

Protects the brake disc in the event of a fall

High stiffness and strength

Protects the rear brake disc from stones and other solid obstacles

CNC milled from high-strength aluminium

Lighter than series components

Developed according to the requirements of our factory drivers

Less stress when riding

Objective: comfort AND safety

Ergonomic contour adapted to the shape of the hand for maximum comfort

Half waffle grip

For a secure grip

Three areas for the metal wire locking

Version: medium

Developed according to the requirements of our factory drivers

Less stress when riding

Objective: comfort AND safety

Ergonomic contour adapted to the shape of the hand for maximum comfort

Half waffle grip

For a secure grip

Three areas for the metal wire locking

Version: soft

For all 48mm forks

Extra strong film

For all 48 mm forks

Extra strong film

Ignition curve adjustment made easy!

Comfortable ignition curve adjustment on the handlebar

There's racing experience here as well! Practical tire iron - long version for minimum effort

There's racing experience here as well!

Practical tyre iron - short version ideal for the portable tool bag

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

The weight-optimised water pump cover ensures maximum water flow

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

CNC milled from high-strength aluminium

Best possible effective protection for the clutch slave cylinder

Prevents damage to the engine housing in the event of chain cracks

No stones drawn in between chain and engine housing (gentle on the material)

Protects from damage in the event of a fall

Endurance-tested for the toughest off-road applications

Easy to mount

Extremely durable

Made of high-strength aluminium

Highest quality workmanship

Custom design

Most effective protection for frame and engine

Decoupled from the frame by rubber pads

Extremely resistant fastening system

Side parts welded from inside and out

Thickness 4mm

Easy to mount

Developed for use on the toughest off-road terrain

Maximum protection at the lowest possible weight

Custom design

Manufactured using state-of-the-art 2-component injection moulding technology

Made from special, high-strength plastic for maximum stability

Decoupled from the frame by rubber pads

Mounting directly on the frame

Specially developed for use in motocross

No O- or Z-rings > minimum loss of power and good durability

13cm tall, 3 pieces each

Upgrade your bike with this factory handlebar and make use of the advantages of an adjustable crossbar, depending on the track ground:

When locked, the crossbar is solid (stiff)

When unlocked, the crossbar is flexible

Dimensions: A = 112mm, B = 811mm, C = 88mm

Minimal wear on brake pads

Significantly longer lasting

Full version for muddy track conditions