Technical Accessories

Ride like our multiple Dakar winners – no problem with our FOOT PEGS "RALLY" SET straight from the world of motorsport

The benefits:

Enlarged tread surface area

Greater control/safety

Fatigue-free riding standing up

Ride like our multiple Dakar winners – no problem with our FOOT PEGS "RALLY" SET straight from the world of motorsport

The benefits:

Enlarged tread surface area

Greater control/safety

Fatigue-free riding standing up

Suitable for the left and right side

Endurance-tested for the toughest off-road applications

Plug & Play mounting

Robust, solid construction

Very easy operation

Foldable mirror

Can be folded inwards when riding offroad

For the off-road motorcycles look

Extremely light

Integrate perfectly into the vehicle design

Perfectly adapted to the KTM ADVENTURE family

Protects the brake disc from stones and other solid obstacles

Central adapter replaces the spacer sleeve on the wheel axle

Integrated air duct for cooling of the brake caliper

Control unit for adjusting the heated seat and heated grips through the combination switches and the dashboard

No new engine flashing necessary

Sporty sound

Stainless steel outer sleeve and interior

Uncompromising race look

Highest quality workmanship

Laser-engraved logo

Plug & Play mounting

Practical companion for national and international trips

Convenient and easy to use

Extremely low weight

7,4 V air compressor

Maximum air pressure: 7,59 bar / 110 PSI / 759 kP

Power: 7,4 V; 6 A; 44,4 Watt

Maximum duration: 15 Minuten (enough to re-fill both tyres

Integrated litium-Ion battery with 7,4 V, 2.200 mAh

Hose and adapters can be stored inside the housing

Charging with USB-C-connection

Dimensions: 131 x 80 x 40 mm

Weight: 0,33 kg

High stiffness and strength

Made of high-quality carbon

Highest quality workmanship

Visual highlight

Perfect for changing the look of your motorcycle

Perfect fit

Silk matte surface

Protects the engine cover from damage

Specifically adapted to the shape of the engine cover

Provides optimum protection

For rear sprockets up to 53T and 220mm - 270mm brake discs

Fast and easy inductive charging of the smartphone during the ride

Can be mounted on the SPC+ smartphone bracket and smartphone adapter

Including USB-A charging cable

This mat is already mandatory for many races

The special material mix absorbs overflowing fuel

The mat also facilitates the retrieval of tools, screws and other small parts during service work

Complies with FIM regulations

Rubberised back

Size: 200cm x 100cm

High-quality, adjustable torque wrench 5-25 NM, including the following accessories

Push-on spoke wrenches in sizes 5.65 and 6.95mm

Push-on ratchet ¼"

Ratchet attachments: 6, 8, 10mm socket wrench, 15 Torx

CNC milled from high-strength aluminium

Elegant anodised surface

Screwed directly to the brake caliper

Safety bolt made of high-strength steel engages directly in the drill hole of the brake disc

It is not possible to move the vehicle when it is locked

No disassembly possible in locked state Including ART approval

CNC milled from high-strength aluminium

Elegant anodised surface

Screwed directly to the brake caliper

Safety bolt made of high-strength steel engages directly in the drill hole of the brake disc

It is not possible to move the vehicle when it is locked

No disassembly possible in locked state Including ART approval

Universal and inconspicuous bracket for your smartphone

Optimal solution for quick and secure fastening of your smartphone on the vehicle

Can be clamped on the handlebar (including different adapter)

The arm can be rotated in any position for the perfect position for your smartphone

Includes also a anti vibration module which decouples the smartphone from the bracket / motorcycle with a specific developed elastomer inlay

It reduces the transfer of vibrations, generated by the motorcycle, to the smartphone and protects it`s sensitive components

New "SPC+" mounting system

Easily accessible and within the rider's field of vision

Fast and easy inductive charging of the smartphone during the ride

Can be mounted on the SPC+ smartphone bracket and smartphone adapter

Including USB-C charging cable

Made of robust material

Pre-cut stickers

Plug & Play mounting

Wiring harness ready for fitting

Fail-safe, dual-circuit immobiliser

Integrated microchip motion sensor

An additional mounting kit is required for installation

Thatcham homologated (strictest European test method)

Testing, charging and keeping batteries fresh

Fully automatic and economical battery charging by means of programmed charge characteristic

Short-circuit protection

Reverse polarity protection

Can be used for several types of batteries (Pb, LiFePo4)

Charging with constant power, or with a specific power control program

Trickle charge during diagnostic or flashing the vehicle

Recovery mode for low battery voltage (BMS, battery management system)

Optimizes battery performance and service life

Precise battery monitoring

Including power supply cable type US

13cm tall, 3 pieces each

For tank and carburetor bleeding

Gasoline resistant

Can only be used for bleeding purposes

Cannot be used as a connection between tank and carburetor!

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Includes drilling for safety wire

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Plug & Play mounting

Highest quality workmanship

Including straps

It withstands a load of 180 kg

The total length is approximately 200cm, folded approximately 100cm

Pack of 100

20cm length

Prevents dirty grips

Optimal solution for quick and secure fastening of your smartphone on the vehicle

Protects your valuable smartphone from rain, dust or mud

Touchscreen remains fully functional

New "SPC+" mounting system, but there is also an adapter included to mount the case also on the previous mounting system

Size 153 x 70 mm

Optimal solution for quick and secure fastening of your smartphone on the vehicle

Protects your valuable smartphone from rain, dust or mud

Touchscreen remains fully functional

New "SPC+" mounting system, but there is also an adapter included to mount the case also on the previous mounting system

Optimal solution for quick and secure fastening of your smartphone on the vehicle

Get´s mounted with a 3M adhesive pad directly on the back side of a smartphone, or any smartphone case

New "SPC+" mounting system, but there is also an adapter included to mount this universal adapter also on the previous mounting system

Dimensions: 66 x 55mm (2.6 x 2.17 inch)

This clever tool is a must for every motorcycle toolbox

With it, you can remove dirt from your fork seals effortlessly

No matter whether it's in the garage or directly at the racetrack this tool extends the life of your seals many times over

For all 48mm forks

Enables secure fastening of the machine

Protects handlebar and tank from scratches

Made from durable ballistic nylon

Load capacity of 280kg

With handlebar loops

With rubberised hooks and carabiner on belt ends

100mm length

20 blades: 0.05 - 0.1 - 0.15 - 0.2 - 0.25 - 0.3- 0.35 - 0.4 - 0.45 - 0.5 - 0.55 - 0.6 - 0.65 - 0.7 - 0.75 - 0.8 - 0.85 - 0.9 - 0.95 - 1.0mm

Transparent plastic canister including a flexible hose and screw cap

For legal reasons, not to be used in some countries for storage and transportation of gasoline