Technical Accessories

Sturdy tubular steel construction

Tool for lifting the motorcycle at the fork legs

Makes removal of the front wheel easier

Tool for lifting the motorcycle at the fork legs (incl. retaining adapter)

Predefined predetermined breaking point

Tool for lifting the motorcycle at the rear axle

Support adapters are clamped into the rear wheel lifting device

Secure stand for your bike

Closed design

2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

Available in two different heights

Improved optics

High version

Excellent weather protection

Closed design

2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

Available in two different heights

Improved optics

High version

Significantly longer durability

Teeth made of high-strength steel, for an extra long service life

Extremely low-wear

Recommended for long journeys

Sprockets with different teeth number as stock are CCCUO_EU!

Developed according to the requirements of our factory drivers

Less stress when riding

Objective: comfort AND safety

Ergonomic contour adapted to the shape of the hand for maximum comfort

Half waffle grip

For a secure grip

Three areas for the metal wire locking

Version: medium

Developed according to the requirements of our factory drivers

Less stress when riding

Objective: comfort AND safety

Ergonomic contour adapted to the shape of the hand for maximum comfort

Half waffle grip

For a secure grip

Three areas for the metal wire locking

Version: soft

There's racing experience here as well! Practical tire iron - long version for minimum effort

Modern and simple design

CNC milled from high-strength aluminium

Elegant anodised surface

Increased safety due to extremely bright flashing light

Cylindrical pair of indicators that completely blend with motorcycle design lines

CNC milled aluminium housing

Black anodizedModern lighting technology

Greater flexibility and better running characteristics

Constant and permanent lubrication

Better sealing against water and dirt

Significantly longer durability

13cm tall, 3 pieces each

For tank and carburetor bleeding

Gasoline resistant

Can only be used for bleeding purposes

Cannot be used as a connection between tank and carburetor!

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

No fading

Consistent, high-level braking performance

Perfect dosing capacity

Greater safety in all conditions

Floating

No distortion

No brake juddering

Clear pressure point across the entire temperature range

Inner ring anodised

Outer ring made of stainless high-performance brake steel

Less manual force with the same brake power

Pure race feeling

Developed for use on the race track

Visual highlight

Elegant anodised surface

Highest quality workmanship

Including straps

It withstands a load of 180 kg

The total length is approximately 200cm, folded approximately 100cm

CNC milled from high-strength aluminium

Elegant anodised surface

Easy to mount

Visual highlight

Suitable for the left and right side

Prevents dirty grips

Optimal solution for quick and secure fastening of your smartphone on the vehicle

Protects your valuable smartphone from rain, dust or mud

Touchscreen remains fully functional

New "SPC+" mounting system, but there is also an adapter included to mount the case also on the previous mounting system

Size 153 x 70 mm

Optimal solution for quick and secure fastening of your smartphone on the vehicle

Protects your valuable smartphone from rain, dust or mud

Touchscreen remains fully functional

New "SPC+" mounting system, but there is also an adapter included to mount the case also on the previous mounting system

Optimal solution for quick and secure fastening of your smartphone on the vehicle

Get´s mounted with a 3M adhesive pad directly on the back side of a smartphone, or any smartphone case

New "SPC+" mounting system, but there is also an adapter included to mount this universal adapter also on the previous mounting system

Dimensions: 66 x 55mm (2.6 x 2.17 inch)

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Modern, subtle, and timeless design

Adjustable handle

Ball joint, for flexible adjustment of the rear mirror

Suitable for the left and right side

Mirror body very thin, light and without edge

Glassless mirror - aluminium itself is the mirror surface

180 mm stem

Exceptionally robust

LED technology, specially developed for use with the Enduro

Very high light output

Light intensity 1500 lm

Light colour approx. 5,500 K

Can be installed in the standard headlight mask

Plug & Play mounting

On EXC and Freeride models, the LED light is switched on and off using the fade-in switch

This article is not available in Germany.

Recommended for storing your timecard during races

Stick it directly to the seat with grip glue

4 pieces 37mm x 31mm

4 pieces 48mm x 40mm

Already mandatory in many competitions

Provides optimum protection

Visual highlight

With the integrated card holder you always have the time in view

A small extra pocket allows you to stow small items

Can also be fitted in combination with the PHDS-handlebar support

CNC milled handlebar mount with damping rubber inserts

Gentle on wrists and shoulder joints

Damping of hard shocks

Absorption of chassis and engine vibrations

Additional handlebar damping in horizontal direction

Optimum steering precision

Further dampers available in three different degrees of hardness (soft, medium, hard) for individual adjustment

Replaces the standard damping rubbers used in the handlebar mount

Can be mounted without additional mounting material

Welded seams

Robust and waterproof bag

Waterproof roll closure

Resistant waterproof coating

CNC milled from high-strength aluminium

Elegant anodised surface

Enables secure fastening of the machine

Protects handlebar and tank from scratches

Made from durable ballistic nylon

Load capacity of 280 kg

With handlebar loops

Perfect for extending lashing straps with hooks or carabiners

 Enables secure fastening of the machine

Protects handlebar and tank from scratches

Made from durable ballistic nylon

Load capacity of 280kg

With handlebar loops

With rubberized hooks on belt ends

Comfortable and easy to use

Fits all standard valves

Pressure display in bar or psi

Integrated pressure release valve for accurate pressure adjustment

Disengageable display and work area lighting

Energy-saving function with automatic cut-off

Maximum measuring pressure: 11 bar

Small and light, so very portable - saves the day in the event of a puncture on the move!

Mini-foot pump with pressure gauge on the swivelling valve head that fits all prevalent valves

Integrated double-cylinder with pressure switch-over to high pressure

Maximum 12 bar

Height: approximately 170mm folded together

With return valve

Anodised dust protection cap

Quick and easy bleeding of the brake

With return valve

Anodised dust protection cap

Quick and easy bleeding of the brake

Fits front and rear for KTM 690 Enduro R

Plastic-coated tubular steel brackets

Extremely resistant fastening system

Exceptionally robust

Perfectly integrated into the motorcycle

Provides optimum protection