RC 390 2022

Anodised valve caps

With valve opener function

Keeps water out of the silencer during cleaning

For inner-diameter of 22 - 42mm

Easily accessible

Mounting material included in scope of supply

With protective cover

Output voltage 5 V/1,000 mA

Power supply for the navigation system or any other use

Comfortable unhooking of springs

Convenient and easy to use

Easy handling and operation

Anodised valve caps

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Funnel specially developed for KTM motorcycles

Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation

Pre-cut stickers

Suitable for front and rear wheel rim

With scaling for both the fluid level and different mixture ratios

Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister

Simple handling thanks to the ergonomic design

Exceptionally robust

Already mandatory in many competitions

CNC milled from high-strength aluminium

Elegant anodised surface

Developed for use on the race track

Race look

Disassembly/assembly in seconds

Protection of the lever in case of unintentional ground contact

No unintentional operation of the lever if contact is made with another rider/vehicle

Easy exchange for the standard handlebar weight

Made of the highest quality materials

Elegant design

Custom design

Extremely robust fasteners, with large zip pullers

Rain cover included

PVC-coated zipper

Easy mounting on top of the pillion seat

No additional carrier needed

All-round expandable volume increases capacity from 10L to 16L

Sturdy tubular steel construction

Tool for lifting the motorcycle at the triple clamp

Makes removal of the front wheel easier

Transparent plastic canister including a flexible hose and screw cap

For legal reasons, not to be used in some countries for storage and transportation of gasoline

100mm length

20 blades: 0.05 - 0.1 - 0.15 - 0.2 - 0.25 - 0.3- 0.35 - 0.4 - 0.45 - 0.5 - 0.55 - 0.6 - 0.65 - 0.7 - 0.75 - 0.8 - 0.85 - 0.9 - 0.95 - 1.0mm

Testing, charging and keeping batteries fresh

Fully automatic and economical battery charging by means of programmed charge characteristic

Short-circuit protection

Reverse polarity protection

Can be used for several types of batteries (Pb, LiFePo4)

Charging with constant power, or with a specific power control program

Trickle charge during diagnostic or flashing the vehicle

Recovery mode for low battery voltage (BMS, battery management system)

Optimizes battery performance and service life

Precise battery monitoring

Including power supply cable type UK

Pre-cut stickers

Suitable for front and rear wheel rim