Products

This feature has to be activated with the XC2 tool after mounting

Significant increase in safety

Tyre air pressure can be shown on the display

Warns the driver in case of loss of pressure, for example due to a puncture

Provides optimum protection

For rear sprockets up to 50T and 220mm - 260mm brake discs

There's racing experience here as well!

Practical tyre iron - short version ideal for the portable tool bag

Easy to use!

Measuring range 0 bar – 4 bar

Clamping head rotatable through 90° on a flexible stainless steel feed line

The valve shaft is therefore accessed easily and quickly

Very accurate measurements by way of a durable internal membrane

Internal pressure is reduced after use by a relief valve (push button)

Significant increase in safety

Tyre air pressure can be shown on the display

Warns the driver in case of loss of pressure, for example due to a puncture

This feature must be enabled from your KTM dealer through the XC2-Tool

Repair kit for tube tyres

Contents:

2 x Tube patches size

1 x Tube patch size 7

1 x Tube of SVS vulvanizing fluid 3g

1 x Emery paper

1 x Car valve core, short

1 x Slotted valve cap

3 x Cartridge 16g each, with freeze protector label

1 x Cartridge adapter

1 x Manual

1 x Textile storage bag

Anodised valve caps

With valve opener function

Anodised valve caps

Optimal protection against penetration of mud, sand and water into the wheel bearing of your wheel

Reduces wear on sealing rings and wheel bearings for longer service life

Optimal protection against penetration of mud, sand and water into the wheel bearing of your wheel

Reduces wear on sealing rings and wheel bearings for longer service life

Pre-cut stickers

Suitable for front and rear wheel rim

Pre-cut stickers

Suitable for front and rear wheel rim

Pre-cut stickers

Suitable for front and rear wheel rim

For wheel size 19/17"

Pre-cut stickers

Suitable for front and rear wheel rim

Including "DUKE" lettering

Pre-cut stickers

Suitable for front and rear wheel rim

For wheel size 18/21"; 19/21"

Pre-cut stickers

Suitable for front and rear wheel rim

For wheel size 18/21"; 19/21"

Pre-cut stickers

Suitable for front and rear wheel rim

For wheel size 18/21"; 19/21"

Visual highlight

Race look

Orange standard wheels of the 890 Duke R

Contains all the components needed to convert the standard cast wheels to spoke wheels

Front wheel 3.0 x 19"

Rear wheel 5.0 x 17"

Contains all the components needed to convert the standard cast wheels to spoke wheels

Front wheel 3.0x19", rear wheel 5.0x17"

Kit without tyre pressure sensors, just standard valves included

Maximum weight saving compared to standard wheels

An absolute must for every ambitious biker

Developed together with the vehicle

Visual highlight

Race look

Forged aluminium wheels, which were developed specific for KTM models

Weight savings: Front wheel: approximately 700g Rear wheel: approximately 500g

Visual highlight

Race look

Orange standard wheels of the 1290 Super Duke R

Visual highlight

Race look

Orange standard wheels of the 890 Duke R

Contains all the components needed to convert the standard cast wheels to spoke wheels

Specially designed for the challenges of off-road use

For the off-road motorcycles look

The best compromise between stiffness and flexibility

Front wheel 3.0 x 19", rear wheel 5.0 x 17"

Tube-type design

Wave brake disc (front) and brake disc (rear) included

Visual highlight

Race look

Orange standard wheels of the 1290 Super Duke R

Maximum weight saving compared to standard wheels

An absolute must for every ambitious biker

Developed together with the vehicle

Visual highlight

Race look

Forged aluminium wheels, which were developed specific for KTM models

Weight savings:

Front wheel: approx. 700g

Rear wheel: approx. 500g

Pre-cut stickers

Suitable for front and rear wheel rim