Products

GRIP SET DUAL COMPOUND - 63002021100 : genuine KTM motorcycle part

GRIP SET DUAL COMPOUND - 63002021200 : genuine KTM motorcycle part

USB power socket 12 V - 64111043000 : genuine KTM motorcycle part

Developed for use on the race track

Prevents unpleasant handlebar hits

High-end WP suspension steering damper

Tested in the IDM and Moto3™Damping adjustable in 30 clicks

Damping can be adjusted directly on the piston which allowes an extremely slim design

Piston offers a special chrome-alloy coating which results in very low coefficient of friction

Developed for use on the race track

Prevents unpleasant handlebar hits

High-end WP suspension steering damper

Tested in the IDM and Moto3™

Each headlight has an 8 watt power consumption and light intensity of 4400 lumens

Optimal illumination of road surface due to wide light angle

Increased safety when riding at night

Housing made of plastic and black powder-coated aluminium

Very small design: 70mm x 61mm diameter

One lamp weighs 485g

Each headlight has an 8 watt power consumption and light intensity of 4400 lumens

Optimal illumination of road surface due to wide light angle

Increased safety when riding at night

Housing made of plastic and black powder-coated aluminium

Very small design: 70mm x 61mm diameter

One lamp weighs 485g

Each headlight has an 8 watt power consumption and light intensity of 4400 lumens

Optimal illumination of road surface due to wide light angle

Increased safety when riding at night

Housing made of plastic and black powder-coated aluminium

Very small design: 70mm x 61mm diameter

One lamp weighs 485g

Optional a USB power outlet can be mounted directly to the relais bracket

Each headlight has an 8 watt power consumption and light intensity of 4400 lumens

Optimal illumination of road surface due to wide light angle

Increased safety when riding at night

Housing made of plastic and black powder-coated aluminium

Very small design: 70mm x 61mm diameter

One lamp weighs 485g

Enables power consumers such as grip heater or radiator fans to be installed on motocross or cross-country models as well

The power consumer is now connected directly to the battery

Consequently, the battery is also drained when the engine is not running, unless the consumer is switched off

The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000

The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000

The connected power consumer can be switched off with the integrated switch

This prevents the battery from being drained unnecessarily

Testing, charging and keeping batteries fresh

Fully automatic and economical battery charging by means of programmed charge characteristic

Short-circuit protection

Reverse polarity protection

Can be used for several types of batteries (Pb, LiFePo4)

Charging with constant power, or with a specific power control program

Trickle charge during diagnostic or flashing the vehicle

Recovery mode for low battery voltage (BMS, battery management system)

Optimizes battery performance and service life

Precise battery monitoring

Including power supply cable type US

FITS: Freeride E-XC 2020, 150 EXC TPI 2020, 250 EXC Six Days TPI 2020, 250 EXC TPI 2020, 300 EXC Six Days TPI 2020, 300 EXC TPI 2020, 250 EXC-F Six Days 2020, Freeride 250 F 2020, 250 EXC-F 2020, 350 EXC-F Six Days 2020, 350 EXC-F 2020, 450 EXC-F Six Days 2020, 450 EXC-F 2020, 500 EXC-F Six Days 2020, 500 EXC-F 2020, 300 EXC TPI ERZBERGRODEO 2020, 150 EXC TPI 2021, 250 EXC SIX DAYS TPI 2021, 250 EXC TPI 2021, 250 EXC-F SIX DAYS 2021, 250 EXC-F 2021, 350 EXC-F SIX DAYS 2021, 350 EXC-F 2021, 450 EXC-F SIX DAYS 2021, 450 EXC-F 2021, 300 EXC SIX DAYS TPI 2021, 300 EXC TPI 2021, 500 EXC-F SIX DAYS 2021, 500 EXC-F 2021, FREERIDE E-XC 2021, 300 EXC TPI ERZBERGRODEO 2021, 350 EXC-F WESS 2021, FREERIDE E-XC 2022, 150 EXC TPI 2022, 250 EXC SIX DAYS TPI 2022, 250 EXC TPI 2022, 300 EXC SIX DAYS TPI 2022, 300 EXC TPI ERZBERGRODEO 2022, 300 EXC TPI 2022, 250 EXC-F SIX DAYS 2022, 250 EXC-F 2022, 350 EXC-F SIX DAYS 2022, 350 EXC-F FACTORY EDITION 2022, 350 EXC-F 2022, 450 EXC-F SIX DAYS 2022, 450 EXC-F 2022, 500 EXC-F SIX DAYS 2022, 500 EXC-F 2022, 150 EXC 2023, 250 EXC 2023, 250 EXC-F SIX DAYS 2023, 250 EXC-F 2023, 250 EXC SIX DAYS 2023, 350 EXC-F 2023, 350 EXC-F SIX DAYS 2023, 300 EXC 2023, 450 EXC-F SIX DAYS 2023, 450 EXC-F 2023, 300 EXC SIX DAYS 2023, 300 EXC ERZBERGRODEO 2023, 500 EXC-F 2023, 500 EXC-F SIX DAYS 2023, FREERIDE E-XC 2023

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Adjustable grip width

Adjustable lever length

Prevents broken levers

Extremely light

Perfect for use on the race track

Flaps removed on ground contact

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Adjustable grip width

Adjustable lever length

Flaps removed on ground contact

Prevents broken levers

Extremely light

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Adjustable grip width

Extremely light

Flaps removed on ground contact

Prevents broken levers

Perfect for use on the race track

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Adjustable grip width

Adjustable lever length

Prevents broken levers

Extremely light

Perfect for use on the race track

Flaps removed on ground contact

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Adjustable grip width

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Adjustable grip width

Flaps removed on ground contact

Prevents broken levers

Extremely light

Perfect for use on the race track

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Adjustable grip width

CNC milled from high-strength aluminium

Elegant anodised surface

Extremely light

Visual highlight with technical and ergonomic added value

Adjustable grip width

Flaps removed on ground contact

Prevents broken levers

Protection of the lever in case of unintentional ground contact

No unintentional operation of the lever if contact is made with another rider/vehicle

Easy exchange for the standard handlebar weight

Handlebar attachment made of high-grade cast aluminium material

Plastic protective bracket is individually replaceable

Protection of the lever in case of unintentional ground contact

No unintentional operation of the lever if contact is made with another rider/vehicle

Easy exchange for the standard handlebar weight

Handlebar attachment made of high-grade cast aluminium material

Plastic protective bracket is individually replaceable

Protection of the lever in case of unintentional ground contact

No unintentional operation of the lever if contact is made with another rider/vehicle

Easy exchange for the standard handlebar weight

Lever protection made of shatterproof plastic

Handlebar attachment made of high-grade cast aluminium material

Plastic protective bracket is individually replaceable

Clamp without disruptive rear view mirror support

Can be used in combination with the handlebar end mirrors

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Including plastic insert

Reduces the risk of a lever being broken

Suitable for all Brembo® and Formula brake and clutch assembles

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Adjustable grip width

Adjustable lever length

Flaps removed on ground contact

Prevents broken levers

Extremely light

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Adjustable grip width

Adjustable lever length

Prevents broken levers

Extremely light

Perfect for use on the race track

Flaps removed on ground contact

Extremely light

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Adjustable grip width

Flaps removed on ground contact

Prevents broken levers

Perfect for use on the race track

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Adjustable grip width

Adjustable lever length

Flaps removed on ground contact

Prevents broken levers

Extremely light

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Adjustable grip width

Adjustable lever length

Prevents broken levers

Extremely light

Perfect for use on the race track

Flaps removed on ground contact

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Adjustable grip width

Extremely light

Flaps removed on ground contact

Prevents broken levers

Perfect for use on the race track

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Ergonomically perfect shape (the result of years of racing experience)

Adjustable grip width

Suitable for all hydraulic Brembo® clutch mountings