Products

With scaling for both the fluid level and different mixture ratios

Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister

Simple handling thanks to the ergonomic design

Materials and knowledge derived from Akrapovič’s involvement in the racing world

Improved throttle response and increases in both power and torque

Designed to get the best performance from the motorcycle

Highest attention to detail for every aspect of the exhaust

Sporty sound

Finished with a nano coating, which offers easier cleaning and better scratch resistance

Plug & Play mounting

No new engine flashing necessary

Testing, charging and keeping batteries fresh

Fully automatic and economical battery charging by means of programmed charge characteristic

Short-circuit protection

Reverse polarity protection

Can be used for several types of batteries (Pb, LiFePo4)

Charging with constant power, or with a specific power control program

Trickle charge during diagnostic or flashing the vehicle

Recovery mode for low battery voltage (BMS, battery management system)

Optimizes battery performance and service life

Precise battery monitoring

Including power supply cable type UK

Highest quality workmanship

Including straps

It withstands a load of 180 kg

The total length is approximately 200cm, folded approximately 100cm

Specially developed for WP forks

Fork bleeding using finger pressure

Developed together with the vehicle

With return valve

Anodised dust protection cap

Quick and easy bleeding of the brake

Fits front and rear for KTM 690 Enduro R

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Protection of the lever in case of unintentional ground contact

No unintentional operation of the lever if contact is made with another rider/vehicle

Easy exchange for the standard handlebar weight

Lever protection made of shatterproof plastic

Handlebar attachment made of high-grade cast aluminium material

Plastic protective bracket is individually replaceable

Practical help when loading the bike or jacking up with the rear wheel lifting device

Made of high-quality carbon

High stiffness and strength

Specially reinforced at points at risk of grinding

Perfect fit

Protection of the lever in case of unintentional ground contact

No unintentional operation of the lever if contact is made with another rider/vehicle

Easy exchange for the standard handlebar weight

Lever protection made of shatterproof plastic

Handlebar attachment made of high-grade cast aluminium material

Plastic protective bracket is individually replaceable

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Permanent cooling during riding

Air flow between rider and seat

Doesn`t heat up in the bright sun unlike the seat itself

UV resistant

Keeps the bottom relatively dry when riding in the rain

Can be installed and removed in seconds due to velcro and elastic bands

For standard and as well KTM_POWERPARTS pillion seat

Seat not included

FITS: 690 Enduro R 2020, 690 SMC R 2020, 690 ENDURO R 2021, 690 SMC R 2021, 690 ENDURO R 2022, 690 SMC R 2022, 690 ENDURO R 2023, 690 SMC R 2023

Plastic-coated tubular steel brackets

Extremely resistant fastening system

Exceptionally robust

Perfectly integrated into the motorcycle

Provides optimum protection

Plastic-coated tubular steel brackets

Extremely resistant fastening system

Exceptionally robust

Perfectly integrated into the motorcycle

Provides optimum protection

Elegant design

Suitable for long-distance travel

High-quality look

Perfect fit

Plug & Play mounting

The 3D structure mesh special foam ensures even pressure distribution, thus enhancing the seating comfort

The optimised shape offers more legroom and better contact with the motorcycle

Custom designed seat for an uncompromising look

Same seat height like the standard seat

CNC milled from high-strength aluminium

Elegant anodised surface

Easy to mount

Visual highlight

Suitable for the left and right side

Exceptionally robust

Already mandatory in many competitions

CNC milled from high-strength aluminium

Elegant anodised surface

Developed for use on the race track

Race look

Disassembly/assembly in seconds

Protection of the lever in case of unintentional ground contact

No unintentional operation of the lever if contact is made with another rider/vehicle

Easy exchange for the standard handlebar weight

Designed to completely change the original look of your motorcycle

Glue the graphics kit directly onto the standard fairing parts

Can be removed without leaving any residue

Made of the highest quality materials

Visual highlight

Perfect fit

Personalise the look of your motorcycle

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Ride like our multiple Dakar winners

Enlarged tread area

More control

Fatigue-free standing riding

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Exceptionally robust

LED technology, specially developed for use with the Enduro

Very high light output

Light intensity 1500 lm

Light colour approx. 5,500 K

Can be installed in the standard headlight mask

Plug & Play mounting

On EXC and Freeride models, the LED light is switched on and off using the fade-in switch

This article is not available in Germany.

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

100mm length

20 blades: 0.05 - 0.1 - 0.15 - 0.2 - 0.25 - 0.3- 0.35 - 0.4 - 0.45 - 0.5 - 0.55 - 0.6 - 0.65 - 0.7 - 0.75 - 0.8 - 0.85 - 0.9 - 0.95 - 1.0mm

Contents are in accordance with DIN standard 13167-2014 for motorcyclists

Note: It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain

Reduces dirt deposits between engine and skid plate

Provides better cooling of the engine

Small and light, so very portable - saves the day in the event of a puncture on the move!

Mini-foot pump with pressure gauge on the swivelling valve head that fits all prevalent valves

Integrated double-cylinder with pressure switch-over to high pressure

Maximum 12 bar

Height: approximately 170mm folded together

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Absorbs the blows of off-road riding

Fatigue-free standing riding

Offers more comfort during long journeys

Protects the footpegs from damage during a potential fall

For use with stock foot pegs

FITS:690 Enduro R 2020, 690 SMC R 2020, 690 ENDURO R 2021, 690 SMC R 2021, 690 ENDURO R 2022, 690 SMC R 2022, 690 ENDURO R 2023, 690 SMC R 2023

For all 48 mm forks

Ideal protection for sealing the fork

For use with an open fork protector

For all 48 mm forks

Ideal protection for sealing the fork

For use with an open fork protector

Funnel specially developed for KTM motorcycles

Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation