Products

Two handlebars in one

The exterior ensures maximum resistance to external damage (e.g. fall)

Additionally hard anodised against corrosion

The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls

Nylon inserts in the inner tube allow thinner walls

Very good flex properties

Comes with handlebar pad

Renthal Twinwall 996

Dimensions: A = 118 mm, B = 811 mm, C = 74 mm

The Twinwall, in the KTM orange design

Two handlebars in one

The exterior ensures maximum resistance to external damage (e.g. fall)

Additionally hard anodised against corrosion

The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls

Nylon inserts in the inner tube allow thinner walls

Very good flex properties

Comes with handlebar pad

Renthal Twinwall 999

Dimensions: A = 104 mm, B = 811 mm, C = 74 mm

The Twinwall, in the KTM orange design

Two handlebars in one

The exterior ensures maximum resistance to external damage (e.g. fall

)Additionally hard anodised against corrosion

The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls

Nylon inserts in the inner tube allow thinner walls

Very good flex properties

Comes with handlebar pad

Renthal Twinwall 996

Dimensions: A = 118 mm, B = 811 mm, C = 74 mm

RIGHT HAND AIR FILTER PANEL

RIGHT HAND AIR FILTER PANEL

RIGHT HAND AIR FILTER PANEL

200 m Wire with 0.61 mm diameter

Makes setting the sag significantly simpler

Folding version for easy stowing in the tool box

Contains all the most-used bolts and small parts for current Offroad models

30% saving compared with purchasing individual parts

Magnetic

Never lose a bolt again!

Perfect for use in combination with the SX stand

Custom designed seat for an uncompromising look

Same seat height like the standard seat

Resistant coating

Maximum grip with unrestricted freedom of movement

Higher compared to the standard seat

Resistant coating

Specially designed for riders with a height of above 1.80 m

Higher compared to the standard seat

Resistant coating

Specially designed for riders with a height of above 1.90 m

Lower compared to the standard seat

Resistant coating

Enables shorter drivers to also achieve the optimum seat height

Same seat height like the standard seat

Resistant coating

Highly elastic foam for extra comfort

Recommended for storing your timecard during races

Stick it directly to the seat with grip glue

This mat is already mandatory for many races

The special material mix absorbs overflowing fuel

The mat also facilitates the retrieval of tools, screws and other small parts during service work

Complies with FIM regulations

Rubberised back

Size: 200cm x 100cm

Endurance-tested for the toughest off-road applications

Easy to mount

Extremely light

Extremely durable

Highest quality workmanship

Custom design

Most effective protection for frame and engine

Most effective protection for frame and engine

Easy to mount

Protects the linkage from damage

Extremely light

Extremely durable

Highest quality workmanship

Endurance-tested for the toughest off-road applications

Custom design

Protects your valuable smartphone from rain, dust or mud

Touchscreen remains fully functional

Handlebar pad and smartphone holder in one

Smartphone cover with velcro fastener attached to the handlebar pad

Smartphone can be easily removed with its cover

Optimal solution for quick and secure fastening of your smartphone on the vehicle

For Smartphones up to 160 x 80mm

Comes with two separate protective strips in case the sleeve is not used

Can also be fitted in combination with the PHDS-handlebar support

Smartphone not included!

Spoiler set

Spoiler set

Spoiler set

On this spoke wrench, the torque is preset at 6 Nm

This prevents over-tightening of the spoke nipples

Too much torque when tightening the spoke nipples is the most frequent cause of broken spokes

Wrench size 6.8mm

6mm and 6.8mm

Comfortable unhooking of springs

Convenient and easy to use

Easy handling and operation

13cm tall, 3 pieces each

13cm tall, 3 pieces each

High-end WP suspension steering damper

Gain in stability at the front wheel

Well thought-out mounting of the damper enables individual handlebar adjustment

Fully adjustable

Same seat height like the standard seat

Resistant coating

Special gradation for good grip even when accelerating hard

Made of robust material

Pre-cut stickers

Designed to completely change the original look of your motorcycle

Glue the graphics kit directly onto the standard fairing parts

Can be removed without leaving any residue

Made of the highest quality materials

Visual highlight

Perfect fit