Products

Provides maximum protection at the lowest possible weight

Optimal protection against stone impact

Easy to mount

Provides maximum protection at the lowest possible weight

Optimal protection against stone impact

Easy to mount

Perfect fit

Visual highlight

Protects the radiator from mud, dirt and sand

Protection against rapid overheating of the engine in muddy conditions

Softer due to high content of organic substances

Thermal insulation by means of ceramic underlayer

Less aggressive brake feel

Lower friction coefficient than sintered brake pads

Special material mixture

Significantly longer lasting

Very high friction coefficient for maximum and permanent braking force

Very good braking effect even in wet conditions

For extreme operating conditions (sand, gravel...)

Eliminates “fading” almost completely

Protects the brake pedal from bending by branches

Significantly longer durability

Teeth made of high-strength steel, for an extra long service life

Extremely low-wear

Recommended for long journeys

Sprockets with different teeth number as stock are CCCUO_EU!

Comes with bushings for 20mm axle diameter

Can be adapted to other axle diameter by using the bike's stock bushings

Installed in the standard clutch, which means simple, uncomplicated and fast installation

Unlimited and total concentration on the perfect line

New generation of Rekluse centrifugal clutch with EXP technology

Easily adjustable from the outside via the clutch slave cylinder

No stalling of the engine in critical situations, such as braking, downhill runs, jumping, or when starting or pushing

Improved traction, controllable by the throttle alone

Slippery, extremely steep sections can be managed more easily > saves time and ensures faster lap times

More relaxed, fatigue-free and controlled riding, even over longer distances and in tough terrain

No more coupling is required, although it is still possible

Special rear brake conversion kit available, allowing braking of the rear wheel with the left hand

Tested in the toughest conditions

New generation of Rekluse centrifugal clutch with EXP 4.0 technology

Specially designed for the challenges of off-road use

Significantly longer durability

Made of high-strength aluminium

The right combination of look, style, and performance

The lightest Renthal Sprocket on the market

Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity

Combination of a high strength base material and exceptionally hardwearing surface

Specially designed for the challenges of off-road use

Significantly longer durability

Made of high-strength aluminium

The right combination of look, style, and performance

The lightest Renthal Sprocket on the market

Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity

Combination of a high strength base material and exceptionally hardwearing surface

Two handlebars in one

The exterior ensures maximum resistance to external damage (e.g. fall)

Additionally hard anodised against corrosion

The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls

Nylon inserts in the inner tube allow thinner walls

Very good flex properties

Comes with handlebar pad

Renthal Twinwall 996

Dimensions: A = 118 mm, B = 811 mm, C = 74 mm

The Twinwall, in the KTM orange design

Two handlebars in one

The exterior ensures maximum resistance to external damage (e.g. fall)

Additionally hard anodised against corrosion

The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls

Nylon inserts in the inner tube allow thinner walls

Very good flex properties

Comes with handlebar pad

Renthal Twinwall 999

Dimensions: A = 104 mm, B = 811 mm, C = 74 mm

The Twinwall, in the KTM orange design

Two handlebars in one

The exterior ensures maximum resistance to external damage (e.g. fall

)Additionally hard anodised against corrosion

The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls

Nylon inserts in the inner tube allow thinner walls

Very good flex properties

Comes with handlebar pad

Renthal Twinwall 996

Dimensions: A = 118 mm, B = 811 mm, C = 74 mm

RIGHT HAND AIR FILTER PANEL

RIGHT HAND AIR FILTER PANEL

RIGHT HAND AIR FILTER PANEL

RIGHT HAND AIR FILTER PANEL

Custom designed seat for an uncompromising look

Same seat height like the standard seat

Resistant coating

Maximum grip with unrestricted freedom of movement

Higher compared to the standard seat

Resistant coating

Specially designed for riders with a height of above 1.80 m

Higher compared to the standard seat

Resistant coating

Specially designed for riders with a height of above 1.90 m

Lower compared to the standard seat

Resistant coating

Enables shorter drivers to also achieve the optimum seat height

Same seat height like the standard seat

Resistant coating

Highly elastic foam for extra comfort

Recommended for storing your timecard during races

Stick it directly to the seat with grip glue

To ensure the sensor magnet is in the correct location even after a change from Enduro to Supermoto wheels

Sensor magnet 58214050054 is required

Endurance-tested for the toughest off-road applications

Easy to mount

Custom design

Extremely light

Extremely durable

Highest quality workmanship

Most effective protection for frame and engine

Optimal solution for quick and secure fastening of your smartphone on the vehicle

Universal and inconspicuous bracket for your smartphone

Can be clamped on the handlebar (including different adapter)

The arm can be rotated in any position for the perfect position for your smartphone

Includes also a anti vibration module which decouples the smartphone from the smartphone bracket respectively the motorcycle with a specific developed elastomer inlay

It reduces the transfer of vibrations, generated by the motorcycle, to the smartphone and protects it`s sensitive components

New "SPC+" mounting system

In addition, this version also includes the new technology "Mag-Align", which makes it easier to position the smartphone correctly on the bracket

Protects your valuable smartphone from rain, dust or mud

Touchscreen remains fully functional

Handlebar pad and smartphone holder in one

Smartphone cover with velcro fastener attached to the handlebar pad

Smartphone can be easily removed with its cover

Optimal solution for quick and secure fastening of your smartphone on the vehicle

For Smartphones up to 160 x 80mm

Comes with two separate protective strips in case the sleeve is not used

Can also be fitted in combination with the PHDS-handlebar support

Smartphone not included!

Optimal solution for quick and secure fastening of your smartphone on the vehicle

Dimensions: 66 x 55mm (2.6 x 2.17 inch)

Optimal solution for quick and secure fastening of your smartphone on the vehicle

Get´s mounted with a 3M adhesive pad directly on the back side of a smartphone, or any smartphone case

New "SPC+" mounting system, but there is also an adapter included to mount this universal adapter also on the previous mounting system

Dimensions: 66 x 55mm (2.6 x 2.17 inch)

Protects your valuable smartphone from rain, dust or mud

Optimal solution for quick and secure fastening of your smartphone on the vehicle

Touchscreen remains fully functional

Optimal solution for quick and secure fastening of your smartphone on the vehicle

Protects your valuable smartphone from rain, dust or mud

Touchscreen remains fully functional

New "SPC+" mounting system, but there is also an adapter included to mount the case also on the previous mounting system

Optimal solution for quick and secure fastening of your smartphone on the vehicle

Protects your valuable smartphone from rain, dust or mud

Touchscreen remains fully functional

New "SPC+" mounting system, but there is also an adapter included to mount the case also on the previous mounting system

Size 153 x 70 mm