Products

With scaling for both the fluid level and different mixture ratios

Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister

Simple handling thanks to the ergonomic design

No new engine flashing necessary

Made from high grade titanium

Sporty sound

Carbon silencer cap

Uncompromising race look

Substantial weight saving

Laser-engraved logo

Plug & Play mounting

Optimum manifold guidance

Greater performance due to special engine mapping

Great sound

Uncompromising race look

Manufactured entirely from high-grade titanium

Complies with current FIM noise regulations

Better response

Significantly more torque

Substantial weight saving

Developed for use on the race track

High-quality look

Highest quality workmanship

The weight of the Akrapovic „Evolution Line" exhaust system is just 3.8 kg

Compared to the standard exhaust system it offers a weight saving of 6.4 kg

The power gets increased by 5 hp

The Akrapovic-kit „Evolution Line" can only be used in combination with the specific engine mapping

It is technical wise not possible to use this specific engine mapping respectively the Akrapovic „Evolution Line" exhaust system on the public road

All indicators need to get disconnected before the engine can be started

Plug & Play mounting

Wiring harness ready for fitting

Fail-safe, dual-circuit immobiliser

Integrated microchip motion sensor

An additional mounting kit is required for installation

Thatcham homologated (strictest European test method)

Includes all the necessary parts for mounting securely in the vehicle

Includes an anti vibration module which decouples the smartphone from the bracket/motorcycle with a specific developed elastomer inlay

It reduces the transfer of vibrations, generated by the motorcycle, to the smartphone and protects it`s sensitive components

Can be mounted on older versions of the smartphone bracket to adapt it to the new "SPC+" mounting system

Developed for use on the race track

Prevents unpleasant handlebar hits

High-end WP suspension steering damper

Tested in the IDM and Moto3™Damping adjustable in 30 clicks

Damping can be adjusted directly on the piston which allowes an extremely slim design

Piston offers a special chrome-alloy coating which results in very low coefficient of friction

Spring fork incl. 9.0 N/mm fork spring

Sticker

Tools

Testing, charging and keeping batteries fresh

Fully automatic and economical battery charging by means of programmed charge characteristic

Short-circuit protection

Reverse polarity protection

Can be used for several types of batteries (Pb, LiFePo4)

Charging with constant power, or with a specific power control program

Trickle charge during diagnostic or flashing the vehicle

Recovery mode for low battery voltage (BMS, battery management system)

Optimizes battery performance and service life

Precise battery monitoring

Including power supply cable type US

Testing, charging and keeping batteries fresh

Fully automatic and economical battery charging by means of programmed charge characteristic

Short-circuit protection

Reverse polarity protection

Can be used for several types of batteries (Pb, LiFePo4)

Charging with constant power, or with a specific power control program

Trickle charge during diagnostic or flashing the vehicle

Recovery mode for low battery voltage (BMS, battery management system)

Optimizes battery performance and service life

Precise battery monitoring

Including power supply cable type UK

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Adjustable grip width

Extremely light

Flaps removed on ground contact

Prevents broken levers

Perfect for use on the race track

Protection of the lever in case of unintentional ground contact

No unintentional operation of the lever if contact is made with another rider/vehicle

Easy exchange for the standard handlebar weight

Lever protection made of shatterproof plastic

Handlebar attachment made of high-grade cast aluminium material

Plastic protective bracket is individually replaceable

Designed to completely change the original look of your motorcycle

Can be removed without leaving any residue

Made of the highest quality materials

Visual highlight

Perfect fit

Personalise the look of your motorcycle

High stiffness and strength

Made of high-quality carbon

Highest quality workmanship

Visual highlight

Perfect for changing the look of your motorcycle

Perfect fit

Silk matte surface

Protects the engine cover from damage

Specifically adapted to the shape of the engine cover

Exceptionally robust

Developed for use on the race track

Protects the engine cover from damage

Specifically adapted to the shape of the engine cover

Made from special, high-strength plastic for maximum stability

CNC milled from high-strength aluminium

Elegant anodised surface

Extremely light

Visual highlight with technical and ergonomic added value

Perfect for use on the race track

Adjustable grip width

Flaps removed on ground contact

Prevents broken levers

Protection of the lever in case of unintentional ground contact

No unintentional operation of the lever if contact is made with another rider/vehicle

Easy exchange for the standard handlebar weight

Lever protection made of shatterproof plastic

Handlebar attachment made of high-grade cast aluminium material

Plastic protective bracket is individually replaceable

Weight saving compared to series components

Extremely light

Made of high-quality carbon

Highest quality workmanship

Visual highlight

Perfect for changing the look of your motorcycle

Silk matte surface

Gets mounted on the LC8 engine next to the ignition cover

Uncompromising race look without disruptive passenger footpegs

Mounting at the mounting points of the passenger footpegs

Extremely light

Integrate perfectly into the vehicle design

Visual highlight

Plug & Play mounting

Race look in a few seconds

Developed for use on the race track

Race look in a few seconds

Covers the hole for the cable routing when the license plate holder support gets removed

Exceptionally robust

Provides optimum protection

Perfectly integrated into the motorcycle

Reliable protection of valuable motorcycle components

Extremely resistant fastening system

Mounting directly on the frame

Protects from damage in the event of a fall

Easy to mount

Protects the fork

Protects from damage in the event of a fall

Easy to mount

Plug & Play mounting

Elegant anodised surface

CNC milled from high-strength aluminium

High-quality look

Visual highlight

Perfect fit

Protects the fork

Made of high-strength aluminium

Elegant anodised surface

Visual highlight

Protects display from unwanted scratches and marks

Made of high-grade, anti-scratch material

Contains:

2 x Ultra-Clear display protection sticker

1 x Squeegee / Smoothing card

1 x Suede polishing cloth

1 x Dust removal strip

Elegant design

High-quality look

Perfect fit

Plug & Play mounting

Visualy perfect match for rider's Ergo sea

Elegant design

Suitable for long-distance travel

High-quality look

Perfect fit

Plug & Play mounting

The 3D structure mesh special foam ensures even pressure distribution, thus enhancing the seating comfort

The optimised shape offers more legroom and better contact with the motorcycle

Custom designed seat for an uncompromising look

Same seat height like the standard seat

Highest quality workmanship

Perfect for changing the look of your motorcycle

Visual highlight

Made of high-quality carbon

Extremely light

Developed for use on the race track

Race look

Silk matte surface

Weight saving compared to series components

Provides improved cooling of the brake and hence the brake fluid, thus counteracting fading

The temperature of the brake is reduced by about 10%.

Developed for use on the race track

Race look

To adjust the width of the brake lever with the left hand during riding

Exceptionally robust

Already mandatory in many competitions

CNC milled from high-strength aluminium

Elegant anodised surface

Developed for use on the race track

Race look

Disassembly/assembly in seconds

Protection of the lever in case of unintentional ground contact

No unintentional operation of the lever if contact is made with another rider/vehicle

Easy exchange for the standard handlebar weight

CNC milled from high-strength aluminium

Elegant anodised surface

The adjustability offers the right ergonomics for every rider

Secure grip due to knurling

Enables increased tilting freedom

Carbon heel protectors included in delivery

Sportier ergonomics

Reverse shifting pattern possible

Developed for use on the race track

An absolute must for every ambitious biker

Highest quality workmanship

High-quality look

Laser-engraved logo

Visual highlight with technical and ergonomic added value

Race look

Adjustable to 12 different positions

Standard position of the footpegs is the same like on the serial footpeg system

Can be moved 24mm upwards and also 8.5mm or 17mm backwards

The complete footpeg system can be twisted 12° upwards by using the alternative mounting point on the frame

This gives you more positions for the footpeg

Designed to completely change the original look of your motorcycle

Glue the graphics kit directly onto the standard fairing parts

Can be removed without leaving any residue

Made of the highest quality materials

Visual highlight

Perfect fit

Personalise the look of your motorcycle

Race look

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Elegant anodised surface

Made of high-strength aluminium

Visual highlight

Perfect for use on the race track

CNC milled aluminium triple clamp

Stiffer than the standard triple clamp

Lighter than the standard triple clamp

More precise handling during hard braking manoeuvre's

Better pressure distribution in the clamping area of the fork