Products

With scaling for both the fluid level and different mixture ratios

Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister

Simple handling thanks to the ergonomic design

Plug & Play mounting

Wiring harness ready for fitting

Fail-safe, dual-circuit immobiliser

Integrated microchip motion sensor

Two watertight, anti-scan radio transmitters with rolling code

An additional mounting kit is required for installation

Thatcham homologated (strictest European test method)

Includes an anti vibration module which decouples the smartphone from the bracket/motorcycle with a specific developed elastomer inlay

It reduces the transfer of vibrations, generated by the motorcycle, to the smartphone and protects it`s sensitive components

Can be mounted on older versions of the smartphone bracket to adapt it to the new "SPC+" mounting system

Testing, charging and keeping batteries fresh

Fully automatic and economical battery charging by means of programmed charge characteristic

Short-circuit protection

Reverse polarity protection

Can be used for several types of batteries (Pb, LiFePo4)

Charging with constant power, or with a specific power control program

Trickle charge during diagnostic or flashing the vehicle

Recovery mode for low battery voltage (BMS, battery management system)

Optimizes battery performance and service life

Precise battery monitoring

Including power supply cable type UK

Highest quality workmanship

Including straps

It withstands a load of 180 kg

The total length is approximately 200cm, folded approximately 100cm

Protection of the lever in case of unintentional ground contact

No unintentional operation of the lever if contact is made with another rider/vehicle

Easy exchange for the standard handlebar weight

Lever protection made of shatterproof plastic

Handlebar attachment made of high-grade cast aluminium material

Plastic protective bracket is individually replaceable

Practical help when loading the bike or jacking up with the rear wheel lifting device

Protection of the lever in case of unintentional ground contact

No unintentional operation of the lever if contact is made with another rider/vehicle

Easy exchange for the standard handlebar weight

Lever protection made of shatterproof plastic

Handlebar attachment made of high-grade cast aluminium material

Plastic protective bracket is individually replaceable

Protects from damage in the event of a fall

Easy to mount

Plug & Play mounting

Elegant anodised surface

CNC milled from high-strength aluminium

High-quality look

Visual highlight

Perfect fit

Protects the fork

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

100mm length

20 blades: 0.05 - 0.1 - 0.15 - 0.2 - 0.25 - 0.3- 0.35 - 0.4 - 0.45 - 0.5 - 0.55 - 0.6 - 0.65 - 0.7 - 0.75 - 0.8 - 0.85 - 0.9 - 0.95 - 1.0mm

Contents are in accordance with DIN standard 13167-2014 for motorcyclists

Note: It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain

Small and light, so very portable - saves the day in the event of a puncture on the move!

Mini-foot pump with pressure gauge on the swivelling valve head that fits all prevalent valves

Integrated double-cylinder with pressure switch-over to high pressure

Maximum 12 bar

Height: approximately 170mm folded together

Sturdy tubular steel construction

Tool for lifting the motorcycle at the fork legs

Makes removal of the front wheel easier

Sturdy tubular steel construction

Tool for lifting the motorcycle at the fork legs

Makes removal of the front wheel easier

Tool for lifting the motorcycle at the fork legs (incl. retaining adapter)

Funnel specially developed for KTM motorcycles

Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation

Prevents dirty grips

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Integrate perfectly into the vehicle design

Ball joint, for flexible adjustment of the rear mirror

Including adapter for mounting

Suitable for the left and right side

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Resistant waterproof coating

Waterproof roll closure

Protects your valuables from moisture and dust

 Enables secure fastening of the machine

Protects handlebar and tank from scratches

Made from durable ballistic nylon

Load capacity of 280kg

With handlebar loops

With rubberized hooks on belt ends

Enables secure fastening of the machine

Protects handlebar and tank from scratches

Made from durable ballistic nylon

Load capacity of 280 kg

With handlebar loops

Perfect for extending lashing straps with hooks or carabiners

Enables secure fastening of the machine

Protects handlebar and tank from scratches

Made from durable ballistic nylon

Load capacity of 280kg

With handlebar loops

With rubberised hooks and carabiner on belt ends

Modern and simple design

CNC milled from high-strength aluminium

Elegant anodised surface

Increased safety due to extremely bright flashing light

LED SMD technology

Increased safety due to extremely bright flashing light

CNC milled from high-strength aluminium

Elegant anodised surface

Integrate perfectly into the vehicle design

Extremely small design: diameter approx. 14mm, length approx. 55mm

Contains 1 turn signal incl. resistance and fitting material

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Modern, subtle, and timeless design

Adjustable handle

Ball joint, for flexible adjustment of the rear mirror

Suitable for the left and right side

Mirror body very thin, light and without edge

Glassless mirror - aluminium itself is the mirror surface

180 mm stem

Use this to remove the dirt from your last mud battle with ease!

A motorcycle grip rubber (not included) can be fitted to the grip

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Includes drilling for safety wire

On the engine there are two oil drain plugs mounted

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Includes drilling for safety wire

On the engine there are two oil drain plugs mounted

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Includes drilling for safety wire

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Includes drilling for safety wire

Pack of 100

20cm length