Products

With scaling for both the fluid level and different mixture ratios

Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister

Simple handling thanks to the ergonomic design

Plug & Play mounting

Wiring harness ready for fitting

Fail-safe, dual-circuit immobiliser

Integrated microchip motion sensor

Two watertight, anti-scan radio transmitters with rolling code

An additional mounting kit is required for installation

Thatcham homologated (strictest European test method)

Includes an anti vibration module which decouples the smartphone from the bracket/motorcycle with a specific developed elastomer inlay

It reduces the transfer of vibrations, generated by the motorcycle, to the smartphone and protects it`s sensitive components

Can be mounted on older versions of the smartphone bracket to adapt it to the new "SPC+" mounting system

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Plug & Play mounting

Offers more comfort to the passenger

Offers more comfort to the passenger

Offers more comfort to the passenger

Offers more comfort to the passenger

Testing, charging and keeping batteries fresh

Fully automatic and economical battery charging by means of programmed charge characteristic

Short-circuit protection

Reverse polarity protection

Can be used for several types of batteries (Pb, LiFePo4)

Charging with constant power, or with a specific power control program

Trickle charge during diagnostic or flashing the vehicle

Recovery mode for low battery voltage (BMS, battery management system)

Optimizes battery performance and service life

Precise battery monitoring

Including power supply cable type UK

Highest quality workmanship

Including straps

It withstands a load of 180 kg

The total length is approximately 200cm, folded approximately 100cm

Practical help when loading the bike or jacking up with the rear wheel lifting device

Protects from damage in the event of a fall

Easy to mount

Plug & Play mounting

Elegant anodised surface

CNC milled from high-strength aluminium

High-quality look

Visual highlight

Perfect fit

Protects the fork

Developed for use on the toughest off-road terrain

Tested in the toughest conditions

For the off-road motorcycles look

The right combination of look, style, and performance

Elegant anodised surface

Visual highlight

Tube-type design for all popular offroad tyres with size 90/90-21 (1.85")

Developed for use on the toughest off-road terrain

Tested in the toughest conditions

For the off-road motorcycles look

The right combination of look, style, and performance

Elegant anodised surface

Visual highlight

Tube-type design for all popular offroad tires with size 90/90-21 (1.85").

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

No gasket included

Ride like our multiple Dakar winners

Enlarged tread area

More control

Fatigue-free standing riding

Developed for use on the toughest off-road terrain

Tested in the toughest conditions

For the off-road motorcycles look

The right combination of look, style, and performance

Elegant anodised surface

Visual highlight

Tube-type design for all popular offroad tires with sizes 90/90-21 (1.85") and 150/70-18 (2.5").

Developed for use on the toughest off-road terrain

Tested in the toughest conditions

For the off-road motorcycles look

The right combination of look, style, and performance

Elegant anodised surface

Visual highlight

Tube-type design for all popular off road tyres with sizes 90/90-21 (1.85") and 150/70-18 (2.5")

Developed for use on the toughest off-road terrain

Tested in the toughest conditions

For the off-road motorcycles look

The right combination of look, style, and performance

Elegant anodised surface

Visual highlight

Tube-type design for all popular offroad tires with size 90/90-21 (1.85") / 140/80-18 (2,5")

Developed for use on the toughest off-road terrain

Tested in the toughest conditions

For the off-road motorcycles look

The right combination of look, style, and performance

Elegant anodised surface

Visual highlight

Tube-type design for all popular off road tires with size 90/90-21 (1.85") / 140/80-18 (2,5")

100mm length

20 blades: 0.05 - 0.1 - 0.15 - 0.2 - 0.25 - 0.3- 0.35 - 0.4 - 0.45 - 0.5 - 0.55 - 0.6 - 0.65 - 0.7 - 0.75 - 0.8 - 0.85 - 0.9 - 0.95 - 1.0mm

Contents are in accordance with DIN standard 13167-2014 for motorcyclists

Note: It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain

Small and light, so very portable - saves the day in the event of a puncture on the move!

Mini-foot pump with pressure gauge on the swivelling valve head that fits all prevalent valves

Integrated double-cylinder with pressure switch-over to high pressure

Maximum 12 bar

Height: approximately 170mm folded together

Absorbs the blows of off-road riding

Fatigue-free standing riding

Offers more comfort during long journeys

Funnel specially developed for KTM motorcycles

Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation

Prevents dirty grips

Excellent weather protection

Closed design

2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

Available in two different heights

Improved optics

High version

Excellent weather protection

Closed design

2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

Available in two different heights

Improved optics

High version

Closed design

2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

Available in two different heights

Improved optics

High version

Closed design

2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

Available in two different heights

Improved optics

Low version

Included in the kit are 2x handlebar support lower parts and 2x fastening bolts

The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support

Available in five different heights

Included in the kit are 2x handlebar support lower parts and 2x fastening bolts

The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Resistant waterproof coating

Waterproof roll closure

Protects your valuables from moisture and dust

 Enables secure fastening of the machine

Protects handlebar and tank from scratches

Made from durable ballistic nylon

Load capacity of 280kg

With handlebar loops

With rubberized hooks on belt ends