450 EXC-F SIX DAYS 2021

Elegant anodised surface

Visual highlight with technical and ergonomic added value

Flaps removed on ground contact

Prevents broken levers

Suitable for all hydraulic Brembo® brake systems

Perfect fit

Made of high-quality carbon

Optimal protection against stone impact

Only for Brembo systems

Repair kit for tube tyres

Contents:

2 x Tube patches size

1 x Tube patch size 7

1 x Tube of SVS vulvanizing fluid 3g

1 x Emery paper

1 x Car valve core, short

1 x Slotted valve cap

3 x Cartridge 16g each, with freeze protector label

1 x Cartridge adapter

1 x Manual

1 x Textile storage bag

Made of high-strength aluminium

Tested in complex and specially-developed test cycles

Position markings for easy adjustment

Dimensions: A = 115 mm, B = 806 mm, C = 62 mm

Pack of 100

20cm length

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Provides more traction when starting

Made of high-strength aluminium

Elegant anodised surface

Pure race feeling

Mounted directly on the OEM-fork

Highest quality workmanship

The right combination of look, style, and performance

Specially designed for the challenges of off-road use

Made from special, high-strength plastic for maximum stability

With exchangeable chain track surface, therefore extremely durable

Protects from damage in the event of a fall

Easy to mount

Protects the fork

Uncompromising race look

Extremely light

Open design

2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

Mounting not possible with Twinwall handlebars

Attached with a special bracket on the handlebar

Optimised air flow

Left hand

Left hand air filter cover

Protects the frame without changing the slim lines of your motorcycle

Manufactured using state-of-the-art 2-component injection moulding technology

Mounting directly on the frame

Prevents abrasion of the frame by dirt, falls or the driver's boots

Reliable protection of valuable motorcycle components

Better control due to better contact with your bike

Increased grip between boot and frame due to extra soft rubber compound

Race look

Visual highlight

With exchangeable chain track surface, therefore extremely durable

Specially designed for the challenges of off-road use

CNC machined out of teflon

Closed design

2-component plastic handguard

Black middle section = maximum strength for optimum protection

Coloured top and bottom parts = highly flexible under the roughest conditions

Available in two different heights

Improved optics

High version

Protects the brake disc in the event of a fall

High stiffness and strength

Protects the rear brake disc from stones and other solid obstacles

CNC milled from high-strength aluminium

Lighter than series components

Protects the brake disc in the event of a fall

High stiffness and strength

Protects the rear brake disc from stones and other solid obstacles

CNC milled from high-strength aluminium

Lighter than series components

Only mountable with Brembo brake system

Uncompromising race look

Extremely light

Open design

Attached directly at the levers with a special mounting

Only mountable with Brembo brake system

Uncompromising race look

Extremely light

Open design

Attached directly at the levers with a special mounting

Only mountable with Brembo brake system

Resistant to the toughest stresses and strains

Ideal protection for sealing the fork

Mounted directly on the fork

No fading

Outer ring made of stainless high-performance brake steel

Minimal wear on brake pads

Significantly longer lasting

With Flame design for added braking performance

Upgrade your bike with this factory handlebar and make use of the advantages of an adjustable crossbar, depending on the track ground:

When locked, the crossbar is solid (stiff)

When unlocked, the crossbar is flexible

Dimensions: A = 112mm, B = 811mm, C = 88mm

Specially developed for use in motocross

No O- or Z-rings > minimum loss of power and good durability

There's racing experience here as well!

Practical tyre iron - short version ideal for the portable tool bag

For all 48 mm forks

Extra strong film

Provides optimum protection

For rear sprockets up to 50T and 220mm - 260mm brake discs

200 m Wire with 0.61 mm diameter

Provides more air

Maximum performance

Digital control

Current temperature can be read at any time

Variable switch-on temperature between 65°C and 95°C

Switch-off temperature 1°C below the selected switch-on temperature

Provides better cooling of the engine

The ideal tool for checking perfect wheel position when tensioning the chain

Funnel specially developed for KTM motorcycles

Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation

Softer due to high content of organic substances

Thermal insulation by means of ceramic underlayer

Less aggressive brake feel

Lower friction coefficient than sintered brake pads

Special material mixture

CNC milled from high-strength aluminium

Elegant anodised surface

Visual highlight

Includes drilling for safety wire

Made from high-tensile, durable steel

Highest quality workmanship

Double locking mechanism

Locking cylinder with optimum protection against any attempts at manipulation

Two keys supplied as standard

Includes rotating PVC cover that protects the cylinder lock from dirt

Made of high-strength aluminium

Improved braking performance

Only for Brembo brake systems

Required for using the 320 mm brake disc 58309060000 with Brembo brake caliper

With return valve

Anodised dust protection cap

Quick and easy bleeding of the brake